Radial shaft seal DBH 8969 — 80.00 x 105.00 x 10.00

DBH 8969 is a radial shaft seal reference, within Seals. Request a quote for 8969 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8969 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. With an 80 mm shaft diameter, 105 mm housing diameter and 10 mm height, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

The DBH 8969 is an Lx design oil seal, with a sealing lip and metal case. Its dimensions are 80 mm shaft diameter (d), 105 mm housing diameter (D) and 10 mm height (h). The Lx design defines the geometry of the lip and the reinforcement, intended for rotating shafts with lubrication. It is a common replacement part in equipment where oil or grease leaks must be prevented and bearings protected from the environment.

It is used in gearboxes, centrifugal pumps, electric motors, mixers, conveyors and power transmission equipment. It also appears in machine tools and process equipment where the shaft rotates inside a housing and the lubricant must be kept inside. In each case, the seal works alongside a bearing or a bushing, and its function is to seal the interface between the shaft and the housing.

To select the correct seal, verify that the shaft diameter, housing diameter and height match those of the DBH 8969. Check the condition of the shaft: if it is worn, scratched or burred, the lip will not seal properly and it should be repaired or a seal with an offset lip used. During installation, lubricate the lip with the same grease or oil used in the equipment, insert it perpendicular to the shaft and avoid striking it. If the housing has burrs, clean it before installation.

If you need a nearby size or an equivalent, send us part number 8969 or the dimensions 80 x 105 x 10 mm via WhatsApp. You can also send a photo of the old seal or the housing drawing. At MR Accesorios Industriales we cross-check the data against the manufacturer's product page and offer alternatives within the same seal category. If the Lx design is not suitable for your application, we will review it with you.

To request a quote for the DBH 8969 oil seal, write to us on WhatsApp with the part number and the quantity you need. We will send you the quote. If you have doubts about the size or the type of lip, ask us and we will help you identify the correct part. MR Accesorios Industriales carries this brand and has more than 80 years of experience in the industry.