Radial shaft seal DBH 8966 — 70.00 x 105.00 x 10.00

DBH 8966 is a radial shaft seal reference, within Seals. Request a quote for 8966 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8966 radial shaft seal is a rotary shaft seal mounted in machine and equipment housings to retain lubricant and block the entry of dust, water or particles. Its Lx design and dimensions of 70 mm shaft, 105 mm housing and 10 mm height make it suitable for pumps, motors, gearboxes and transmissions. MR Accesorios Industriales carries this brand and advises you so you choose the right seal.

The DBH 8966 is a radial lip seal with the following dimensions: 70 mm shaft diameter, 105 mm housing diameter and 10 mm height. Its Lx design corresponds to a seal with a sealing lip and spring, intended for rotating shafts with lubrication. The 8966 designation identifies the size and construction type within the DBH line. It is made with an elastomer resistant to mineral oils and greases, and a metal case that gives it rigidity for press-fit mounting in the housing.

This seal is used in equipment where a shaft rotates inside a crankcase or support: centrifugal pumps, electric motors, gearboxes, conveyor rollers, mixers and belt or chain drives. Its function is to retain the oil or grease inside the assembly and prevent contaminants from entering from outside. It is also used as a secondary closure in low-pressure and moderate-speed applications, provided the shaft and housing are in good condition.

To mount it, check that the shaft measures 70 mm and has adequate roughness, with no burrs or marks that could damage the lip. The 105 mm housing must be clean and free of deformation; it is advisable to lubricate the lip with the same grease or oil used in the equipment before inserting it. The 10 mm height defines the space available in the housing. If the shaft shows wear, consider a seal with an offset lip or a repair sleeve. The final selection depends on the speed, temperature and fluid of the equipment.

If you need a nearby size or an equivalent from another brand, send us the 8966 code or the 70x105x10 dimensions and the type of application. At MR Accesorios Industriales we can look for alternatives within the DBH line or from other brands we carry, respecting the dimensions and the Lx design. We can also advise you if the original seal has a different lip configuration or material. The more data you give us — speed, temperature, fluid — the better the recommendation will be.

To request a quote for the DBH 8966 seal, send the code by WhatsApp to MR Accesorios Industriales. We reply with the quote and alternatives if we do not have it at the time. We have been working in the industrial sector for more than 80 years, so we can advise you on mounting and care so the seal lasts as expected.