Radial shaft seal DBH 8961 — 60.00 x 100.00 x 10.00

DBH 8961 is a radial shaft seal reference, within Seals. Request a quote for 8961 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8961 radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. Its designation summarizes the three dimensions that define the mounting: 60 mm shaft, 100 mm housing and 10 mm height. It is a common wear part in gearboxes, pumps, electric motors and transmission equipment, where an early leak forces intervention on the assembly.

This item is a DBH 8961 radial shaft seal, identified by its code 8961. Its dimensions are 60.00 mm shaft diameter (d), 100.00 mm housing diameter (D) and 10.00 mm height (h). The indicated design is Lx, which in practice defines the geometry of the lip and the metal body. Before mounting, verify that the housing has the correct diameter and depth and that the shaft has no burrs or wear on the contact track.

Typical applications for a seal of this size appear in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. In all cases it performs two functions: retaining the oil or grease on the inner side and preventing contaminants from entering from the outside. It is also used in industrial washing machines, mixers and conveyors, where the environment often contains dust or moisture.

To select the correct seal, the dimension alone is not enough: you must consider the peripheral speed of the shaft, the working temperature and the type of lubricant. The Lx design determines the mounting direction and the orientation of the lip. During assembly, lubricate the lip with the same grease or oil used in the equipment, avoid striking it and check it with a flat tool. If the shaft has a groove or wear, consider a repair sleeve.

If you need a nearby size or an equivalent from another brand, send us code 8961 along with the shaft, housing and height dimensions. A photo of the old seal or the housing drawing also works. At MR Accesorios Industriales we cross-check the designation with the manufacturer's data sheet to confirm that the replacement matches in diameters, height and lip type before quoting it.

If you have any questions, write to us on WhatsApp and send us code 8961 or the dimensions of the seal you are looking for. We will reply with the quote and the alternative. We work with official brands and also with in-house manufacturing of other components, so we can guide you if the seal is part of a larger assembly.