Radial shaft seal DBH 8816 — 38.00 x 62.00 x 8.50/3.00

DBH 8816 is a radial shaft seal reference, within Seals. Request a quote for 8816 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8816 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of contaminants such as dust, water or particles. With dimensions of 38 mm shaft, 62 mm housing and a height of 8.50/3.00 mm, it is used in gearboxes, pumps, electric motors and industrial equipment in general. MR Accesorios Industriales carries this official brand so you can replace worn seals and maintain the reliability of your equipment.

This item is a radial shaft seal from the DBH brand, identified with the code 8816. Its dimensions are 38 mm shaft diameter (d), 62 mm housing diameter (D) and a total height of 8.50/3.00 mm (h). The A 038 design corresponds to a specific construction configuration that combines a sealing lip and a dust lip. It is intended for rotating shafts and is press-fitted into the housing. The stepped height of 8.50/3.00 mm indicates that the outer section has a shoulder, which allows better anchoring and centering in the cavity.

Typical applications for this oil seal include gearboxes, centrifugal pumps, electric motors, compressors, spindles and power transmission equipment. In all cases, its function is to prevent oil or grease leaks and protect bearings and gears from the entry of dirt. It is commonly found in agricultural machinery, process equipment and hydraulic systems where reliable sealing is required on 38 mm shafts. It is also used as a replacement part in preventive and corrective maintenance.

To correctly select an oil seal, verify that the shaft, housing and height dimensions match those of your equipment's housing and shaft. The 8.50/3.00 mm height is particular: the 3.00 mm shoulder must seat in a groove or against the bottom of the housing. During installation, lubricate the lip with the same oil or grease used in the equipment, avoid striking it and make sure the shaft has no burrs or excessive wear. If the shaft has a worn track, consider using an oil seal with an offset lip or a repair sleeve.

If you need an equivalent oil seal or a nearby size, you can contact us. We have alternatives from other brands and series that can adapt to your application. For that, it is helpful if you send us the original code, the exact shaft and housing dimensions, and a photo of the part. That way we can identify the most suitable option. MR Accesorios Industriales has more than 80 years of experience in the industry and can advise you on the selection.

To request a quote for the DBH 8816 oil seal or ask about a similar size, write to us on WhatsApp and mention the code 8816. We will reply shortly with the information you need to move forward with your order.