Radial shaft seal DBH 8811 — 16.00 x 29.90 x 7.30

DBH 8811 is a radial shaft seal reference, within Seals. Request a quote for 8811 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8811 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 16 mm shaft diameter, 29.90 mm housing diameter and 7.30 mm height, and Lx design, it is press-fitted into the housing and runs on the shaft with a flexible lip. It is a wear part: when lubricant loss appears or dirt gets in, it is replaced. MR Accesorios Industriales carries this brand and helps you identify the correct size.

This item is a radial shaft seal from the DBH brand, identified by part number 8811. Its dimensions are 16 mm shaft diameter, 29.90 mm housing diameter and 7.30 mm height. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The sealing lip bears on the shaft and the outer diameter fits into the housing. It is a standard replacement part, not a custom component.

It is used in gearboxes, pumps, electric motors, drive shafts and equipment with lubricated bearings. In any assembly where a shaft passes through a housing containing oil or grease, the seal prevents leaks and blocks the entry of dust or water. It also appears in agricultural machinery, conveyors and process equipment. If the seal fails, lubricant loss accelerates wear on the neighboring bearing, so it should be checked at every maintenance interval.

To install it, check that the shaft has no burrs or marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip before inserting it and fit the seal perpendicular to the shaft, without striking it unevenly. When selecting a replacement, in addition to the three dimensions, take into account the type of lubricant, the operating temperature and the shaft speed. If the Lx design does not match the original, consult us before replacing it.

If you cannot find part number 8811 or need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With that data we look for the equivalent in DBH or another brand we carry. We can also advise you if the original seal has a different design. The more complete the information, the faster we can give you a reliable alternative.

To request a quote for the DBH 8811 oil seal or ask for an equivalent, write to us on WhatsApp and send us part number 8811 or the dimensions 16 x 29.90 x 7.30 mm. MR Accesorios Industriales carries this brand and has more than 80 years of experience in the industry. We will reply shortly with the options that best suit your equipment.