DBH 8796Vit radial shaft seal — 36 x 50 x 7

DBH 8796Vit is a reference of radial shaft seal, within Seals. Request a quote for 8796Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8796Vit radial shaft seal is a lip seal that mounts on the shaft and closes against the housing to contain lubricant and stop the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and transmission equipment where there is a shaft rotating inside a housing. Its dimensions of 36 mm shaft, 50 mm housing and 7 mm height place it in the range of compact general-purpose seals.

This item is a DBH 8796Vit radial shaft seal with 36 mm shaft diameter, 50 mm housing diameter and 7.00 mm height, according to the A 156-R design. The sealing lip rests on the shaft and the outer metal case is press-fitted into the housing. That combination of dimensions corresponds to a small-section seal, intended for reduced axial spaces where a taller seal does not fit. DBH is a brand MR sells.

Typical applications for a seal of these dimensions appear in small gearboxes, centrifugal pumps, low-power electric motors, compressors and belt or chain transmission equipment. It is also found in machine tools, mixers and conveyors, as long as the shaft is 36 mm and the housing is 50 mm. In all those cases the function is the same: retain the oil or grease inside the assembly and prevent contaminants from entering that would accelerate wear on bearings and gears.

To select a seal properly, it is not enough for the three diameters to match. You must verify the peripheral shaft speed, the working temperature, the type of lubricant and the differential pressure between the lubricated side and the environment. The A 156-R design defines the geometry of the lip and the body, so it is best to respect it if the equipment came with that configuration. When installing it, lubricate the lip, seat the seal perpendicular to the shaft and use an installation tube or bushing so as not to damage the edge. If the shaft has burrs or wear, correct it before installing.

Send us the shaft diameter, the housing diameter and the height you measured with a caliper. The code engraved on the old seal or a photo of the part also works. With that data we look for the equivalent within the DBH line or in another brand MR sells, and we indicate the alternative with the same A 156-R design or a compatible one. The code does not have to be identical: often the nomenclature changes and the size is the same.

MR Accesorios Industriales has been working with seals and oil seals, with a warehouse in Buenos Aires, Argentina and service to workshops, plants and maintenance throughout the area. To get a quote for the DBH 8796Vit, write to us on WhatsApp with the code and the dimensions. We reply with the corresponding reference and how to arrange the order.