Radial shaft seal DBH 8767 — 30.00 x 63.00 x 16.00

DBH 8767 is a radial shaft seal reference, within Seals. Request a quote for 8767 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8767 radial shaft seal is a lip seal designed for rotating shafts, with dimensions of 30 mm shaft diameter, 63 mm housing and 16 mm height. Its A 053-Bidi design contains lubricant and excludes contaminants in both directions of rotation. It is used in gearboxes, pumps, electric motors and industrial equipment where preventing leaks and extending bearing life is critical.

This DBH 8767 seal has a designation that corresponds to its numeric code. Its standard dimensions are 30.00 mm shaft diameter (d), 63.00 mm housing diameter (D) and 16.00 mm height (h). The A 053-Bidi design indicates a double-lip configuration, suitable for applications requiring retention of grease or oil and exclusion of dust or water from the outside. The elastomer and the internal spring ensure uniform contact on the shaft.

Typical applications for this seal include gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. In every case, its function is to prevent lubricant leakage and the entry of contaminating particles that accelerate wear on bearings and gears. It is a frequently serviced part in industrial plants, factories and mobile equipment.

To install this seal correctly, check that the shaft has adequate hardness and roughness, with no burrs or marks. Lubricate the lip with the same oil or grease used in the equipment before installation. Insert the seal perpendicular to the shaft, using an installation tube that presses on the outer diameter. Avoid striking the lip or the spring. If the housing has a chamfer, make sure the seal seats fully.

If you need an equivalent size or a nearby variant, contact us with the code 8767 or with the dimensions 30x63x16 mm. We can look for alternatives in other brands or configurations, always respecting the housing and shaft tolerances. MR Accesorios Industriales carries this brand and can advise you on the most suitable option for your equipment.

To request a quote for this DBH 8767 seal or ask about a replacement, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best fit your application. We can also advise you on installation and fit dimensions so that the repair lasts.