Radial shaft seal DBH 8736 — 38.00 x 60.00 x 8.00/14.50

DBH 8736 is a radial shaft seal reference, within Seals. Request a quote for 8736 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8736 radial shaft seal is a lip seal designed to close off the passage of oil or grease in rotating equipment. It mounts on a 38 mm shaft and inside a 60 mm housing, with a height of 8.00/14.50 mm that combines a lip section and a taller outer section. Its A 109-R H design corresponds to a seal with a rubber lip and metal reinforcement, suitable for general industrial applications where lubricant must be contained and contaminants kept out.

This DBH 8736 seal has the following dimensions: shaft diameter 38 mm, housing diameter 60 mm and height 8.00/14.50 mm. The A 109-R H design indicates a single-lip seal with a metal body and elastomer lip, with a total height that combines the mounting section and the lip section. It is used to seal rotating shafts in gearboxes, pumps, electric motors and transmission equipment, where lubricant must be retained and bearings protected from dust and moisture.

Typical applications include speed reducers, centrifugal pumps, electric motors, compressors and belt- or chain-drive transmission equipment. In all cases, the seal works on a shaft rotating inside a fixed housing, and its function is to keep lubricant inside the assembly and prevent external particles from entering. It is a wear part that should be replaced when leaks appear or when the equipment is disassembled for inspection.

To correctly select a seal, verify that the shaft and housing dimensions match those of the equipment's housing and shaft. The 8.00/14.50 mm height is specific to this design and is not always interchangeable with single-height seals. It is also important to check the condition of the shaft surface: if it shows wear or scratches, the lip will not seal properly. During installation, lubricate the lip with the same oil or grease used in the equipment and make sure the seal enters perpendicular to the housing.

If you need a seal with equivalent dimensions or a nearby size, you can consult us. Sometimes a seal from another brand with the same combination of shaft, housing and height can work, but the lip design and elastomer type must be verified. We can also look for alternatives if the original design is no longer available. To do so, send us the code 8736 or the exact dimensions (shaft, housing and height) via WhatsApp and we will quote you.

At MR Accesorios Industriales we carry the DBH brand as an official brand. If you have doubts about the compatibility of this seal with your equipment, write to us on WhatsApp with the code 8736 and we will help you confirm the size or find the right replacement.