Radial shaft seal DBH 8724Vit — 80.00 x 100.00 x 10.00

DBH 8724Vit is a radial shaft seal reference, within Seals. Request a quote for 8724Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8724Vit radial shaft seal is a lip seal designed to stop lubricant leakage and prevent contaminants from entering rotating shafts. With dimensions of 80 mm shaft diameter, 100 mm housing diameter and 10 mm height, and an Mx-Bidi design, it suits applications where sealing must work in both directions of rotation or with alternating pressure. It is a key component for maintaining lubricant integrity and extending the service life of bearings and components in industrial equipment.

This DBH 8724Vit seal has a shaft diameter of 80 mm, a housing diameter of 100 mm and a height of 10 mm. Its Mx-Bidi design means it is prepared to seal in both directions, making it suitable for shafts that rotate in both directions or for applications with alternating pressure. The designation 8724Vit corresponds to the manufacturer's reference DBH, an official brand that MR carries.

It is used in gearboxes, pumps, electric motors, transmission equipment and general machinery where oil or grease must be contained and bearings protected from dust, water or particles. It is common in applications with 80 mm shafts that require reliable, long-lasting sealing, especially where there is reversal of rotation or pressure variations.

For installation, check that the shaft and housing are clean, free of burrs and scratches. Lubricate the seal lip with the same oil or grease used in the equipment before inserting it. Fit it perpendicular to the shaft, without striking it directly, using a tube or press that bears on the outer ring. Make sure the lip faces the fluid side to be retained, unless the bidi design requires another orientation according to the manufacturer.

If you need a seal with similar dimensions or an equivalent from another brand, send us the code 8724Vit or the dimensions 80x100x10 and the type of application. At MR Accesorios Industriales we can look for alternatives in our seals and oil seals catalog, respecting the required tolerances and design. We can also advise you on the best option according to the working conditions.

To request a quote for this DBH 8724Vit seal or ask about other sizes, write to us on WhatsApp and mention the code 8724Vit. At MR Accesorios Industriales we reply with the technical information so you can move forward with your project.