Radial shaft seal DBH 8706 — 58.00 x 75.00 x 9.00

DBH 8706 is a radial shaft seal reference, within Seals. Request a quote for 8706 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8706 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 58 mm shaft, 75 mm housing and 9 mm height place it in medium-sized transmission equipment and pumps. It is a wear part: when oil leakage appears or dirt enters, it is replaced with a seal of the same designation.

This item is a seal of Lx design, with the dimensions shown on its product page: 58 mm shaft diameter, 75 mm housing diameter and 9.00 mm height. The designation 8706 identifies the size within the DBH line. The sealing lip runs on the shaft and the outer diameter is press-fitted into the housing; depending on the Lx design, the lip may have a particular configuration that should be checked against the original seal before replacing it.

It is used in gearboxes, centrifugal pumps, electric motors, transmission shafts and process equipment where a shaft rotates inside a housing and the lubricant must be separated from the environment. In food, water treatment or aggregate plants, the seal also prevents dust or liquid from entering the bearing. It is commonly found in equipment where the shaft is 58 mm and the housing is 75 mm.

To install it, clean the housing and the shaft, check that there are no burrs or marks on the sealing track and lubricate the lip before inserting it. The seal is fitted perpendicular to the shaft, with a tube or spacer that presses on the outer ring, never on the lip. If the shaft shows wear, consider a sleeve or a nearby size. The selection depends on speed, temperature and the fluid to be retained.

If you need an equivalent or a nearby size, send us the code 8706 or the dimensions 58 x 75 x 9 mm and the type of equipment. With that data we can look for an alternative within the DBH line or other brands we carry. We can also advise you if the housing or shaft have different tolerances and the height or outer diameter needs to be adjusted.

MR Accesorios Industriales carries the DBH brand as an official brand. If you have doubts about the lip orientation, the elastomer material or compatibility with the lubricant, write to us on WhatsApp with the code 8706 and we will help you choose the right seal.