Radial shaft seal DBH 8696 — 28.60 x 38.10 x 6.00

DBH 8696 is a radial shaft seal reference, within Seals. Request a quote for 8696 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8696 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its standard dimensions of 28.60 mm shaft, 38.10 mm housing and 6.00 mm height make it suitable for compact equipment where axial space is limited. The Lz design indicates a configuration with a sealing lip and spring, intended for continuous service under moderate pressure and speed conditions.

This item is a radial shaft seal from the DBH brand, identified by part number 8696. According to the product page data, it corresponds to a 28.6 mm diameter shaft, a 38.1 mm housing and a total height of 6.00 mm. The Lz design refers to a construction with an elastomeric lip and steel spring, which maintains contact on the shaft throughout its service life. It is a thin-section part, suitable for assemblies where housing depth is limited.

Typical applications for this oil seal include small gearboxes, electric motors, low-pressure centrifugal pumps, fan shafts and light-duty transmission equipment. In all cases, its function is twofold: to prevent oil or grease from leaking outward and to block the entry of dust, water or particles that accelerate wear on bearings and gears. Because of its compact size, it is often found in mechanisms where radial and axial space is critical.

To correctly select an oil seal such as the DBH 8696, check that the shaft, housing and height dimensions match those of the machined housing. The shaft surface must be ground and have adequate hardness to prevent premature grooves. During installation, lubricate the lip with the same oil used in the equipment, insert the seal perpendicularly and avoid striking it directly on the elastomer. If the shaft shows wear, consider a nearby size or a repair sleeve.

If you need an oil seal equivalent to the 8696 or a nearby size, the most practical approach is to send the part number, the dimensions or a photo of the removed part. With that data, MR Accesorios Industriales can look for the alternative available in other brands or series, respecting the same shaft, housing and height dimensions. Variants with different lip materials can also be offered depending on the fluid and working temperature.

To move forward with the quote, send part number 8696 or the dimensions 28.60 x 38.10 x 6.00 mm directly by WhatsApp to MR Accesorios Industriales. If you have questions about the Lz design or want to confirm compatibility with your equipment, attach an image of the housing and the shaft. This way the part can be validated before ordering and installation errors avoided.