Radial shaft seal DBH 8628Vit — 32.00 x 47.00 x 6.00

DBH 8628Vit is a radial shaft seal reference, within Seals. Request a quote for 8628Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8628Vit radial shaft seal is a lip seal that prevents oil or grease leaks and blocks the ingress of dust and water in rotating equipment. With dimensions of 32 mm shaft, 47 mm housing and 6 mm height, and Lx-R-H design, it is press-fitted into the housing and runs on the rotating shaft. It is a common wear part in pumps, electric motors, gearboxes and transmission cases, where lubrication must be contained.

This item is a DBH 8628Vit radial shaft seal, identified by its designation and by the dimensions shown on the product page: 32 mm shaft diameter, 47 mm housing diameter and 6.00 mm height. The Lx-R-H design indicates a configuration with a sealing lip, a reinforced body and a retaining spring, intended for rotating shafts with lubrication. The DBH brand is an official brand that MR supplies, so the product conforms to its standard seal line.

Typical applications for a seal of these dimensions include centrifugal pumps, electric motors, gearboxes, transmission shafts and continuous process equipment. In all cases it fulfills the function of retaining lubricant inside the assembly and preventing contaminants from entering from outside. It is also used in machine tools, industrial washing equipment and conveyor systems, where the shaft rotates at moderate speeds and sealing integrity is critical to the service life of the bearings.

To install this oil seal, check that the shaft and housing are clean, with no burrs or scratches, and that the dimensions match those on the product page: 32 mm shaft, 47 mm housing and 6.00 mm height. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the seal perpendicular to the shaft, without striking the lip. If the shaft shows wear, consider an adjacent size or a repair sleeve. The correct selection depends on speed, temperature and the type of lubricant.

If you need an equivalent or a close size, send us the code 8628Vit or the dimensions of the old seal: shaft diameter, housing diameter and height. You can also send a photo of the part and the housing. At MR Accesorios Industriales we compare that data with the available options and provide a compatible alternative. For non-standard sizes, ask us and we will see how to source it.

To request a quote for the DBH 8628Vit oil seal, write to us on WhatsApp with the code and the quantity you need. At MR Accesorios Industriales we reply with alternatives if there is no exact match. We can also advise you on installation or on selecting an equivalent seal according to your equipment's conditions.