Radial shaft seal DBH 8626Pol — 70.00 x 87.00 x 8.50

DBH 8626Pol is a radial shaft seal reference, within Seals. Request a quote for 8626Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8626Pol radial shaft seal is a lip seal mounted on the shaft that closes against the housing to retain lubricant and block the entry of dust, water or particles. Its designation indicates 70 mm shaft, 87 mm housing bore and 8.50 mm height, with an Lx-R-AH design. It is used in gearboxes, pumps, electric motors and power transmission equipment where there is continuous rotation and contact with oil or grease.

This item is a DBH 8626Pol radial shaft seal, identified by its code 8626Pol. According to the product page data, the shaft diameter is 70 mm, the housing bore diameter is 87 mm and the height is 8.50 mm. The Lx-R-AH design corresponds to a configuration with a retaining lip and a reinforced body, suitable for mounting in a cylindrical housing. The elastomer and the internal spring work together to keep the lip pressed against the rotating shaft.

Typical applications for this seal include gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment. In all cases it serves to confine the lubricant inside the assembly and prevent the entry of external contaminants. It is commonly found in equipment where the shaft rotates continuously and the service temperature is moderate, always within the limits of the seal material.

To select and install it correctly, check that the shaft diameter and housing bore diameter match the product page values. The seal must go in straight, without blows that deform the lip, and it is advisable to lubricate the lip before sliding it onto the shaft. Check that the shaft has no burrs or wear and that the housing is clean. If the equipment runs with heavy vibration or high temperature, ask about a variant compound or design.

If you need an equivalent or a nearby size, send us the code 8626Pol or the shaft, housing and height dimensions. You can also send a photo of the old seal or the housing drawing. At MR Accesorios Industriales we compare against the alternatives in the DBH line and confirm which option fits without modifying the mounting. If the exact size is not available, we look for the closest one within the same category.

To request a quote for this DBH 8626Pol oil seal, message us on WhatsApp with the code and the quantity you need. You can also ask about other seals, bearings or power transmission supplies. At MR Accesorios Industriales we reply with the technical information and send you a quote. Send your inquiry and we will take care of it.