Radial shaft seal DBH 8611Pol — 58.00 x 80.00 x 12.00

DBH 8611Pol is a radial shaft seal reference, within Seals. Request a quote for 8611Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8611Pol oil seal is a single-lip radial seal that prevents oil or grease leaks and blocks the ingress of dust and water in rotating shaft assemblies. Due to its dimensions of 58 mm shaft, 80 mm housing and 12 mm height, it is used in gearboxes, pumps, electric motors and transmission equipment. MR Accesorios Industriales carries this official brand and advises you so you choose the correct oil seal for your application.

This item is a DBH 8611Pol radial shaft seal, identified by its 8611Pol designation. Its attributes indicate a shaft diameter of 58 mm, a housing bore diameter of 80 mm and a height of 12.00 mm. The Lx-R-H design corresponds to a sealing lip with spring and rigid body, suitable for retaining lubricant in rotary motion. The 8611 series nomenclature groups standardized dimensions for shafts in that range. Always confirm these dimensions against the housing before mounting.

Typical applications for a 58x80x12 mm oil seal include gearboxes, centrifugal pumps, electric motors, drive shafts and continuous process equipment. In these assemblies, the oil seal protects the bearings and lubricant from external contamination. It is also used in mixers, compressors and agricultural or industrial machinery where the shaft rotates at moderate speeds and oil or grease is present.

To select the oil seal, check that the shaft diameter, housing and height match the values on the product page. The shaft surface must be ground and free of burrs; the housing must be clean and free of deformation. During mounting, lubricate the lip and use an installation tool to avoid damaging it. If the equipment operates with high vibration or temperature, ask about material or design variants.

If you need an equivalent or a nearby size, send us the code 8611Pol or the dimensions of your current oil seal. We can look for alternatives within the same series or from other brands we carry, always respecting the shaft, housing and height dimensions. We also advise you if the original oil seal has a special design or if the housing shows wear.

To request a quote for the DBH 8611Pol oil seal, send the code on WhatsApp to MR Accesorios Industriales. We will confirm the size and equivalent options. If you have doubts about mounting or selection, our technical team helps you define the right seal for your equipment.