DBH 8575Pol radial shaft seal — 83 x 100 x 9

DBH 8575Pol is a reference of radial shaft seal, within Seals. Request a quote for 8575Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8575Pol radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to contain lubricant and stop the ingress of dust, water or particles. Due to its size of 83 mm shaft, 100 mm housing and 9 mm height, it is used in gearboxes, pumps and power transmission equipment where bearings and gears must be protected. MR Accesorios Industriales carries this brand and helps you confirm the correct variant for your equipment.

This item is a DBH radial shaft seal identified as 8575Pol, with the following dimensions: shaft diameter 83 mm, housing diameter 100 mm and height 9.00 mm. The indicated design is Lx-H-AH, which defines the geometry of the lip and the outer body. It is a compact-section seal, designed for housings where axial space is limited and a reliable seal on the shaft is needed. The complete designation allows you to order it without ambiguity.

Typical applications for a seal of this size appear in gearboxes, reducers, centrifugal pumps, mixers and belt or chain drive equipment. It is also found in agricultural and industrial machinery where oil or grease must be retained and contaminants kept out of the bearing. It is always advisable to verify that the shaft has no wear on the contact track and that the housing is clean and free of burrs before installation.

To select the correct seal, compare the three dimensions: shaft, housing and height. An error of a few tenths in shaft diameter can cause leaks or an overly tight fit. Also check the condition of the shaft surface, the concentricity of the housing and the type of lubricant. If the equipment operates at high temperature or speed, ask us about the appropriate material and lip variant for your case.

If you cannot find the exact size or need an equivalent, send us the code 8575Pol along with the shaft, housing and height dimensions, and a photo of the old seal if possible. With that data we can look for an alternative from another brand within the same category. We can also advise you on the lip design and material according to the fluid and working temperature.

To request a quote for the DBH 8575Pol seal, write to us on WhatsApp at MR Accesorios Industriales with the code and dimensions. We will reply with the options and technical data you need to make your purchase decision.