Radial shaft seal DBH 8567Pol — 65.00 x 88.00 x 12.00

DBH 8567Pol is a radial shaft seal reference, within Seals. Request a quote for 8567Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8567Pol radial shaft seal is a lip seal mounted in the housing of a piece of equipment to retain lubricant and stop dust, water or particles from entering. With a 65 mm shaft, 88 mm housing and 12 mm height, it covers continuously operating rotating shafts in pumps, gearboxes and motors. It is a wear part: when oil loss appears, it should be replaced with an equivalent of the same size.

This seal has dimensions of 65.00 mm shaft diameter, 88.00 mm housing diameter and 12.00 mm height, with an Lx-H-H design. That design combines a sealing lip and a dust lip on a metal body, and defines how the part seats in the housing and which face of the shaft the lip works against. Before ordering, verify those three dimensions with a caliper: they are what govern the installation.

Typical applications are centrifugal pump shafts, gearboxes, reducers, electric motors and power transmission equipment where there is oil or grease that must stay inside and contamination that must stay outside. It is also used in agricultural machinery and process equipment, as long as the shaft rotates and the seal works against a lubricated track free of burrs.

To select it, first check the condition of the shaft track: if it has a groove or wear, the new lip will not seal even if the size is correct. Also check the housing for impacts or remnants of old sealant, and lubricate the lip before inserting the part. Installation is done with even pressure, without striking the lip or the spring, and the seal should be aligned with the shaft.

If the part number 8567Pol does not appear on your list or you need a nearby size, send us the shaft, housing and height dimensions along with a photo of the old part. With that data we look for the equivalent in the same brand or in another line we carry, and we confirm the option before quoting. We can also verify the Lx-H-H design against the manufacturer's data sheet.

At MR Accesorios Industriales we work with seals and oil seals alongside bearings, housings and power transmission, so if the seal is mounted on a bearing or a housing, we can review the complete assembly. Send the part number 8567Pol or the dimensions by WhatsApp and we'll prepare your quote.