Radial shaft seal DBH 8539Vit — 70.00 x 92.00 x 12.00

DBH 8539Vit is a radial shaft seal reference, within Seals. Request a quote for 8539Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8539Vit radial shaft seal is a lip seal that mounts on the shaft and closes against the housing to retain lubricant and stop the entry of dust, water or particles. With a 70 mm shaft, 92 mm housing and 12 mm height, and Lx-H-H design, it is used in gearboxes, pumps, motors and power transmission equipment. MR Accesorios Industriales carries this brand and helps you confirm the size and material before requesting a quote.

This item is a DBH 8539Vit radial shaft seal with the following dimensions: shaft diameter 70 mm, housing diameter 92 mm and height 12.00 mm. The indicated design is Lx-H-H, which defines the geometry of the lip and the seal body. It is a component of the seals and oil seals category, intended for rotating shafts where oil or grease must be contained and, at the same time, the entry of contaminants prevented. The designation 8539Vit is the part number by which this size is identified within the DBH line.

Typical applications for a seal of this size appear in gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission equipment. It is also found in agricultural machinery, material handling equipment and process lines where the shaft rotates on bearings or bushings and a reliable closure is needed. In all cases, the seal works alongside a lubricant and protects the bearing or bushing from external contamination.

To install it correctly, verify that the shaft and housing are clean, free of burrs or marks, and that the size matches that of the seal. The lip must be lubricated before inserting the shaft, and it is advisable to use an installation tool that presses on the outer edge, never on the lip. If the shaft is worn or rough, the seal may not seal even if the size is correct. When selecting, take into account the type of lubricant, the working temperature and the shaft speed.

If you need an equivalent or a nearby size, send us the part number 8539Vit or the dimensions 70 x 92 x 12 mm and the Lx-H-H design. With that data we can look for alternatives within the DBH line or in other brands we carry, always confirming against the manufacturer's data sheet. We can also advise you if the housing or shaft have tolerances different from the usual ones. The more data you send us, the more accurate the proposal.

To request a quote for this DBH 8539Vit oil seal, write to us on WhatsApp with the part number or the dimensions. MR Accesorios Industriales carries the DBH brand and can advise you on the option that best suits your equipment. If you have doubts about installation or want to compare with another size, ask us and we will reply with the available technical information.