Radial shaft seal DBH 8533Pol — 60.00 x 82.00 x 12.00

DBH 8533Pol is a radial shaft seal reference, within Seals. Request a quote for 8533Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8533Pol radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Its designation indicates a 60 mm shaft, 82 mm housing and 12 mm height, with an Lx-H design. It is used in gearboxes, pumps, electric motors and power transmission equipment that need a reliable barrier at the point where the shaft passes through the body.

This item is a DBH 8533Pol radial shaft seal, identified by its code 8533Pol, with the following dimensions: shaft (d) 60 mm, housing (D) 82 mm and height (h) 12.00 mm. The Lx-H design corresponds to a seal with a sealing lip and mounting body, intended for rotating shafts with internal lubrication. The lip runs on the shaft surface and the outer case fits into the housing, creating the static and dynamic seal.

Typical applications for a seal of these dimensions are found in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. In every case it performs the same function: retaining the oil or grease inside the assembly and preventing contaminants from entering from outside. It is a wear part that is replaced when lubricant leakage or dirt ingress appears.

To select it, verify that the shaft, housing and height dimensions match the housing and shaft of your equipment. Check the condition of the shaft surface: a scratched or worn surface accelerates lip failure. During mounting, lubricate the lip and use an installation tool that presses on the outer diameter, without striking the seal. If the shaft has play or eccentricity, evaluate an alternative sealing solution.

If you need an equivalent or a nearby size, send us the code 8533Pol along with the shaft, housing and height dimensions, and the type of fluid to be retained. With that data we can look for an alternative within the DBH line or from other brands we carry. If space allows, design or material variants can also be evaluated according to temperature and operating speed.

MR Accesorios Industriales carries the DBH brand as an official brand within its line of seals and oil seals. If you want a quote for this size or to ask about an equivalent, write to us on WhatsApp with the code 8533Pol and the dimensions of your equipment. Our technical team will reply with the alternative that best suits your application.