DBH 8515Vit radial shaft seal — 95 x 118 x 10

DBH 8515Vit is a reference of radial shaft seal, within Seals. Request a quote for 8515Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8515Vit oil seal is a single-lip radial shaft seal that prevents oil or grease leaks and blocks the entry of dust and water in equipment with a rotating shaft. It is press-fitted into the housing and runs on the shaft with a minimal lubricant film. It is a wear part: when lubricant loss or contaminant ingress appears, it is replaced. MR Accesorios Industriales carries this brand and advises you so you choose the right size.

The 8515Vit is a DBH radial shaft seal with a 95.00 mm shaft diameter, 118.00 mm housing diameter and 10.00 mm height. Its Lx-H AH design combines a sealing lip and a reduced-height section, intended for limited axial spaces. The elastomer lip bears on the shaft and the outer body is fixed by interference in the housing. The Vit designation identifies the compound formulation, which defines the seal's thermal and chemical resistance.

It is used in gearboxes, centrifugal pumps, electric motors, conveyor rollers, mixers and transmission equipment where a shaft rotates inside a lubricated housing. It also appears in applications exposed to dust, wash water or splashes, where the seal must contain the lubricant and slow the entry of particles. It is a critical part in preventive maintenance: its failure is detected by oil stains, lubricant consumption or wear on the adjacent bearing.

To select the seal, check that the shaft diameter and the housing diameter match the original size, and that the available height allows the 10.00 mm to fit. The shaft must be free of burrs, with suitable roughness and no marks on the sealing track. Lubricate the lip before installing and place the seal perpendicular to the shaft, with a tube or press bearing on the outer edge. If the shaft shows wear, consider a repair sleeve.

If you need an equivalent or a different size, send us the code 8515Vit along with the shaft, housing and height dimensions, or the drawing of the part. With that data we search the DBH line and other brands we carry for the compatible option. We can also advise you on the type of compound according to temperature and working fluid. Service is via WhatsApp, with a technical response and no obligation.

MR Accesorios Industriales carries seals, bearings and power transmission. To request a quote for the DBH 8515Vit oil seal, write to us on WhatsApp with the code and dimensions. We will confirm alternatives.