Radial shaft seal DBH 8513Pol — 100.00 x 120.00 x 11.00

DBH 8513Pol is a radial shaft seal reference, within Seals. Request a quote for 8513Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8513Pol oil seal is a lip-type radial shaft seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Because of its dimensions —100 mm shaft, 120 mm housing and 11 mm height— it is used in power transmission equipment and machinery with large-section shafts. MR Accesorios Industriales carries this brand and will quote it for you by WhatsApp.

This item is a DBH 8513Pol radial shaft seal, with 100 mm shaft, 120 mm housing and 11.00 mm height. The Lx-R design corresponds to a seal with a sealing lip and a mounting configuration specific to that assembly. The lip runs on the rotating shaft and the outer case is fixed in the housing, so sealing is achieved through permanent contact. It is a replacement part, not a structural component: its function is to contain the lubricant and protect the interior of the assembly.

It is used in gearboxes, pumps, electric motors, rollers and power transmission equipment where the shaft rotates inside a fixed housing. It also appears in agricultural machinery, conveyors and process equipment operating with dust, water or washdown. In all these cases the seal prevents oil or grease leaks and extends the service life of bearings and gears. If the equipment works with a lot of dirt, it is advisable to check the condition of the lip more often.

To select the seal, verify that the three dimensions match the available shaft, housing and depth. The Lx-R design must be compatible with the type of mounting and with the pressure direction. During installation, lubricate the lip, avoid striking it and make sure the shaft has no burrs or marks that could damage the seal. If the shaft shows wear, consider a repair sleeve or an alternative size before installing the new seal.

If you need an equivalent or a nearby size, send us the part number 8513Pol together with the shaft, housing and height dimensions. It also helps if you indicate the equipment or application and a photo of the old part. With that data we can look for an alternative within the same brand or another line we carry. You do not need to have the data sheet on hand: the part number and dimensions are enough to guide the search.

To request a quote for the DBH 8513Pol oil seal, write to us by WhatsApp at MR Accesorios Industriales with the part number and the quantity you need. We will reply with the quote and alternatives if an equivalent size is available. We can also advise you on installation or selection if you tell us which equipment it goes on. With more than 80 years in the business, at MR we work daily with seals and oil seals so you can find the right part.