Radial shaft seal DBH 8510Vit — 42.00 x 62.00 x 8.00

DBH 8510Vit is a radial shaft seal reference, within Seals. Request a quote for 8510Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8510Vit radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or contaminating particles. With dimensions of 42 mm shaft diameter, 62 mm housing diameter and 8 mm height, and an Lx-H design, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this official brand and advises you so you choose the right oil seal for your application.

This item is a radial shaft seal from the DBH line, identified with the code 8510Vit. Its standardized dimensions are: shaft diameter 42 mm, housing diameter 62 mm and height 8.00 mm. The Lx-H design indicates a configuration with a sealing lip and a specific profile for retaining oil or grease on rotating shafts. The lip elastomer and internal spring ensure continuous sealing. It is a standard replacement part, not a custom component, so it is obtained with the exact designation.

Typical applications for a 42 x 62 x 8 mm oil seal include gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and belt or chain drive equipment. It is also used in agricultural machinery, industrial washing equipment and hydraulic systems where lubricant must be contained and bearings protected. Whenever the shaft is 42 mm and the housing is 62 mm, this oil seal can replace a worn component, after verifying the condition of the surfaces.

For correct mounting, verify that the shaft has no burrs or wear and that the housing is clean and undamaged. Lubricate the oil seal lip with the same oil or grease used in the application before inserting it. The 8 mm height must match the housing depth to prevent leaks. If the shaft shows a groove or wear mark, consider using an oil seal with an offset lip or a repair sleeve. Selection depends on speed, temperature and fluid type, data that should be confirmed with the manufacturer.

If you need an equivalent oil seal or a nearby size, send us the code 8510Vit or the dimensions 42 x 62 x 8 mm and the type of application. We can look for alternatives in other brands or series with similar characteristics, always respecting the shaft and housing dimensions. We also offer advice to identify the oil seal from a physical sample or the equipment's technical data sheet. At MR Accesorios Industriales we work with seals and oil seals for multiple industries.

To request a quote for this DBH 8510Vit oil seal, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the purchasing options. If you have doubts about the size or design, our technical team can help you confirm that it is the right one for your machine. Remember that we also manufacture split plummer block housings, ANSI chains and pulleys, and we carry bearings, bushings and lubricants. More than 80 years of experience back us as an industrial supplier in Argentina.