DBH 8482 radial shaft seal — 15 x 35 x 8

DBH 8482 is a reference of radial shaft seal, within Seals. Request a quote for 8482 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8482 radial shaft seal is a lip seal that closes off the passage of oil or grease on rotating shafts and keeps out dust and water. Because of its dimensions — 15 mm shaft, 35 mm housing and 8 mm height — it is used in gearboxes, pumps, electric motors and power transmission equipment. It is a wear part: when lubricant leakage or dirt ingress appears, it should be replaced with one of the same designation.

This item is a DBH 8482 radial shaft seal, with 15 mm shaft diameter, 35 mm housing diameter and 8.00 mm height. It corresponds to the Lx design, which combines a sealing lip with a dust lip to retain lubricant and slow the ingress of contaminants. The elastomer runs against the rotating shaft and the outer diameter is press-fitted into the housing. It is a standard replacement part, not a custom component.

Typical applications for a seal of these dimensions are gearboxes, centrifugal pumps, electric motors, reducers and transmission equipment. It also appears on fan shafts, mixers and machine tools where oil has to be separated from the environment. In every case it performs the same function: keeping lubricant in and dirt out, extending the life of bearings and gears.

To install it, check that the shaft has no burrs or wear and that the housing is clean and free of dents. Lubricate the lip before inserting it and fit the seal perpendicular to the shaft, without deforming it. If the shaft shows a marked wear groove, a design with the lip in a different position may be advisable. Selection depends on the type of lubricant, the working temperature and the shaft speed.

If you need an equivalent, send us part number 8482 along with the shaft, housing and height dimensions, and a photo of the old part if you have one. With that data we look for the alternative within the DBH line or other brands we carry. We can also advise you if the seal is mounted in an assembly and you need to confirm the design.

MR Accesorios Industriales carries the DBH brand as a brand. If you want a quote for this seal, write to us on WhatsApp with part number 8482 and we will reply with the available information. You can also ask us for the list of seals in the same family to compare options.