Radial shaft seal DBH 8469 — 35.00 x 46.45 x 6.40

DBH 8469 is a radial shaft seal reference, within Seals. Request a quote for 8469 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8469 radial shaft seal is a lip seal that mounts on the shaft and closes against the housing to retain lubricant and block the entry of dust, water or particles. Due to its dimensions of 35 mm shaft, 46.45 mm housing and 6.40 mm height, and its Lx design, it is used in gearboxes, pumps, electric motors and power transmission equipment that require reliable, low-maintenance sealing.

This item is a DBH 8469 radial shaft seal, identified by its designation 8469. Its dimensions are 35 mm shaft diameter, 46.45 mm housing diameter and 6.40 mm height. The Lx design corresponds to a seal with a sealing lip and metal body, intended for press fitting into a cylindrical housing. It is a direct replacement part, not a generic component: respect these three dimensions so the lip rests correctly on the shaft and the exterior seals in the cavity.

Typical applications for a seal of these dimensions appear in rotating equipment where oil or grease must be separated from the environment: gearboxes, centrifugal pumps, electric motors, rollers and transmission shafts. It is also used in machine tools and continuous process equipment, where a lubricant leak or contaminant entry shortens bearing life. In all these cases, the seal protects the bearing and keeps lubrication in place.

For installation, check that the shaft has no burrs or wear and that the housing is clean and free of dents. Lubricate the lip with the same oil or grease used in the equipment before inserting it, and do so with a flat pusher to avoid deforming the seal. Selection involves respecting the shaft, housing and height dimensions, and choosing the lip material according to temperature and fluid. If the shaft is scratched, consider a wear sleeve or a nearby size.

If you need an equivalent or a close size, send us code 8469 or the three seal dimensions via WhatsApp. At MR Accesorios Industriales we cross-check the manufacturer's data sheet and offer alternatives from the same brand or another that fulfills the function. We can also review whether the Lx design is suitable for your application or if another lip profile is better.

MR Accesorios Industriales carries the DBH brand and has more than 80 years of experience in bearings, power transmission and seals. To request a quote for this seal or ask about a similar size, write to us on WhatsApp with code 8469 and we will reply with the technical information you need.