Radial shaft seal DBH 8413Pol — 60.40 x 79.35 x 9.30

DBH 8413Pol is a radial shaft seal reference, within Seals. Request a quote for 8413Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8413Pol oil seal is a single-lip radial seal that mounts on the shaft and against the housing to retain lubricant and stop dust, water or particles from entering. Its A 156-R design and its dimensions of 60.40 mm shaft, 79.35 mm housing and 9.30 mm height make it suitable for gearboxes, pumps and rotating equipment where axial space is limited. At MR Accesorios Industriales we sell it as part of our seals and oil seals line.

This DBH 8413Pol oil seal has a shaft diameter of 60.40 mm, a housing diameter of 79.35 mm and a height of 9.30 mm. The A 156-R design corresponds to a single-lip radial shaft seal with spring, intended for rotating shafts with permanent lubrication. The 8413Pol nomenclature identifies the size and construction type within the DBH line. Before installing it, check that the shaft has no burrs or marks that could damage the lip and that the housing is clean and free of deformation.

It is used in gearboxes, centrifugal pumps, electric motors, conveyor rollers and transmission equipment where oil or grease must be separated from the environment. It also appears in road and agricultural machinery and in process lines that operate with dust or moisture present. In all those cases, the seal serves the dual function of retaining lubricant and preventing contaminants from entering the bearing or bushing.

To select it properly, always compare the three dimensions: shaft diameter, housing diameter and height. A seal with the same section but a different height may not fit the cavity. Also check the shaft surface speed, operating temperature and type of lubricant, because the life of the lip depends on that. If the shaft is worn, consider a nearby size or a seal with an auxiliary lip.

If you need an equivalent or a close size, send us the 8413Pol part number along with your shaft and housing dimensions, a photo of the old part or the assembly drawing. With that data we look for the alternative within the DBH line or other brands we carry. We can also advise you if the seal is mounted on a stepped shaft or in a split housing.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals line. If you want to ask about a different size, write to us on WhatsApp with the 8413Pol part number and we will reply with the quote.