Radial shaft seal DBH 8384/85 — 17.00 x 32.00 x 7.00

DBH 8384/85 is a radial shaft seal reference, within Seals. Request a quote for 8384/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8384/85 radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With a 17 mm shaft, 32 mm housing and 7 mm height, and Lx design, it is a small, commonly used size in equipment with reduced shaft diameters. It is press-fitted into the housing and works in direct contact with the rotating shaft.

This item is a DBH 8384/85 radial shaft seal, with the following dimensions: shaft diameter 17 mm, housing diameter 32 mm and height 7.00 mm. The Lx design corresponds to the lip and housing configuration that identifies the series. It is a compact-section seal, intended for thin-wall housings and small-section shafts. The 8384/85 designation is the part number you will use to order it or to search for an equivalent size.

Typical applications for a seal of this size appear in small gearboxes, low-power electric motors, small centrifugal pumps, compressors, machine tools and transmission equipment where oil or grease must be separated from the environment. It is also used on fan, mixer and conveyor shafts in laboratory or light production settings, where radial space is limited and a reliable seal is needed at moderate speeds.

To install it correctly, check that the shaft and housing diameters match the indicated 17 mm and 32 mm, and that the housing width accommodates the 7.00 mm height. The lip must be lubricated before insertion, and it is advisable to use an installation tool that presses on the outer edge, not on the lip. Check that the shaft has no burrs or deep marks on the sealing track, because that shortens the seal's life. If the equipment runs with heavy vibration, consider a support or flange that keeps it aligned.

If you need an equivalent or a nearby size, send us the 8384/85 part number along with the shaft, housing and height dimensions you have on the equipment. A photo of the old seal or the cover drawing also helps. With that data we can see whether there is an alternative in the same series or in another brand that MR carries, always respecting the mounting dimensions. You don't need to guess: the part number and dimensions are enough to start the search.

To request a quote for this DBH 8384/85 seal or to ask about a similar size, write to us on WhatsApp and send us the part number and dimensions. At MR Accesorios Industriales we work with official brands we carry and with in-house manufacturing, and we guide you so the seal fits properly in the housing and lasts as long as it should. If you have doubts about installation or the Lx design, we can also sort them out through that channel.