DBH 8376Pol radial shaft seal — 45 x 60 x 7

DBH 8376Pol is a reference of radial shaft seal, within Seals. Request a quote for 8376Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8376Pol radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With a 45 mm shaft, 60 mm housing and 7 mm height, and Lx-R design, it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales sells it and quotes it on WhatsApp under part number 8376Pol.

This item is a radial shaft seal from the DBH line, identified as 8376Pol. Its dimensions are 45.00 mm shaft diameter (d), 60.00 mm housing diameter (D) and 7.00 mm height (h). The Lx-R design indicates a single-lip configuration with spring, intended for rotating shafts with lubrication. The elastomeric lip bears on the shaft and the spring maintains contact pressure; the outer body is press-fitted into the bore. It is a wear component: when the lip hardens, tears or loses elasticity, it starts to leak oil.

Typical applications for a 45 x 60 x 7 mm seal with Lx-R design are gearboxes, reducers, centrifugal pumps, electric motors, drive shafts and continuous process equipment. It also appears in machine tools, conveyors and equipment in the food or chemical industry where the goal is to contain lubricant and prevent the entry of contaminants. In all cases it works on a rotating shaft and against a fixed housing, with the sealing surface lubricated.

To install it, check that the shaft has no burrs, scratches or wear in the contact area: a shaft with a groove or high roughness ruins the new lip within a few hours. The housing must be clean, free of dents and with the correct diameter so the seal enters straight and press-fitted, never by striking the lip directly. Lubricate the lip with the same grease or oil used in the equipment before inserting the shaft. If the previous seal failed, also check bearing play, concentricity and operating temperature.

If you need a different design or an equivalent from another brand, send us part number 8376Pol or the dimensions 45 x 60 x 7 mm and the type of application. With that data we can look for alternatives in the same radial shaft seal category, always confirming tolerances, lip material and temperature range against the manufacturer's data sheet before quoting. Do not replace by approximation without verifying the shaft and housing diameters.

MR Accesorios Industriales sells the DBH brand. To request a quote for this seal, write to us on WhatsApp with part number 8376Pol and the dimensions 45 x 60 x 7 mm. We will reply with the corresponding reference and the technical data you need for installation.