DBH 8373 radial shaft seal — 35 x 62 x 12

DBH 8373 is a reference of radial shaft seal, within Seals. Request a quote for 8373 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8373 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent the entry of dust, water or particles. Due to its dimensions —35 mm shaft, 62 mm housing and 12 mm height— it is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales supplies this brand and advises you so you can choose the correct seal according to the shaft and the type of service.

This item is a DBH 8373 radial shaft seal, identified by the designation 8373. Its dimensions are 35 mm shaft diameter (d), 62 mm housing diameter (D) and 12.00 mm height (h). The Lx design corresponds to a seal with a sealing lip and metal body, designed for press fitting into the housing. It is a standard replacement part within the seals and oil seals category, and it is supplied under the complete designation to avoid confusion with similar dimensions.

Typical applications for a seal of these dimensions appear in rotating equipment where oil or grease must be separated from the environment: gearboxes, centrifugal pumps, electric motors, conveyor rollers and transmission shafts. It is also used in machine tools and process equipment where the shaft rotates on bearings and the lubricant must be contained. In all cases, the seal runs on a shaft that must be ground and have the appropriate hardness so that the lip does not wear prematurely.

To select and install a seal such as the 8373, take into account the shaft speed, the service temperature and the type of fluid to be retained. The lip must be lubricated; if the seal runs dry, a different material should be evaluated. When installing it, check that the housing is clean and free of burrs, and that the lip does not turn inside out as it passes over the shaft. If the shaft has a groove or a shoulder, use an installation sleeve to avoid damaging the lip. Shaft runout and play also affect the service life of the seal.

If you need a seal equivalent to the 8373, the most practical approach is to send us the complete part number and, if possible, a photo of the old part or the dimensions measured with a caliper. With that data we will indicate the alternative in the same brand or in another of the brands we supply. We can also advise you if the Lx design is not the one that corresponds to your equipment and a different type of lip or housing is required.

To request a quote for the DBH 8373 seal, write to us by WhatsApp at MR Accesorios Industriales with the part number 8373 and the quantity you need. We will reply with the alternatives we have in the seals and oil seals line. If you manage scheduled maintenance, it is best to send us the complete list of seals per equipment so we can prepare a combined proposal.