DBH 8342 radial shaft seal — 35 x 52 x 9

DBH 8342 is a reference of radial shaft seal, within Seals. Request a quote for 8342 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8342 radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. Its designation corresponds to a seal with a 35 mm shaft diameter, 52 mm housing diameter and 9 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment that need a reliable barrier at the point where the shaft passes through the body.

This item is a DBH 8342 radial shaft seal with the following dimensions: shaft diameter 35 mm, housing diameter 52 mm and height 9.00 mm. The Lx design indicates a single-lip configuration with spring, suitable for rotating shafts with lubrication. The sealing lip runs on the shaft surface and the outer diameter is press-fitted into the housing. It is a standard replacement part within the line of seals that MR Accesorios Industriales sells.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, rollers and belt or chain drive equipment. In all cases it serves to keep oil or grease inside the assembly and prevent contaminants from entering from outside. It is also used in process equipment where the shaft rotates continuously and an economical, easy-to-replace sealing barrier is required.

To correctly select a seal, you must verify the shaft diameter, housing diameter and available height. Rotation speed, operating temperature and the type of lubricant affect the service life of the lip. During installation, clean the shaft surface, lubricate the lip with the same oil used in the equipment and seat the seal perpendicular to the shaft. Avoid striking the lip during installation and make sure the spring faces the fluid to be retained.

If you need a seal equivalent to the DBH 8342, send us the full part number, the shaft, housing and height dimensions, and a photo of the old part if you have one. With that data we can look for the alternative within the brands we sell or suggest an alternative that performs the same function. The more accurate the information, the faster we can confirm the right option for your equipment.

To request a quote for the DBH 8342 seal, write to us on WhatsApp at MR Accesorios Industriales with the part number and dimensions. We will reply with the alternatives that best suit your application.