Radial shaft seal DBH 8325 — 50.00 x 65.00 x 10.00

DBH 8325 is a radial shaft seal reference, within Seals. Request a quote for 8325 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8325 seal is a radial seal with 50.00 mm shaft, 65.00 mm housing and 10.00 mm height, with Lx design. It is used to retain lubricant and exclude contaminants in rotating equipment, with the lip working on the shaft. It is a wear part: when oil loss appears or dust enters, it is replaced. MR Accesorios Industriales carries it and advises you on choosing the correct seal for your equipment.

The DBH 8325 is a single-lip radial shaft seal. Its dimensions are 50.00 mm shaft diameter (d), 65.00 mm housing diameter (D) and 10.00 mm height (h). The Lx design indicates the configuration of the lip and body, which defines how it seats in the housing and how it seals on the shaft. It is a standard component of the seals and oil seals category, designed to be press-fitted into a machined cavity and rotate against a ground shaft surface.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where there is a shaft rotating inside a housing with lubricant. Its function is twofold: to retain oil or grease inward and to stop the entry of dust, water or particles. In food, process or material handling plants, a worn seal is noticed by lubricant stains, high consumption or premature wear of the adjacent bearing.

To install it, check that the housing is clean, free of burrs or marks, and that the shaft has no splines, rust or wear on the sealing surface. Lubricate the lip before inserting it and place the seal perpendicular, with a tube or spacer that presses on the outer edge, never on the lip. If the shaft shows a wear groove, consider shifting the seal a few millimeters or using a wear sleeve. Shaft runout and play also affect seal service life.

If you need a nearby size or an equivalent, send us the code 8325 along with the shaft, housing and height dimensions, and a photo of the old seal or the housing. With that data we look for the alternative in the DBH line or in another brand we carry. We can also guide you if the Lx design is not the one that corresponds to your application and a different type of lip or housing is needed.

MR Accesorios Industriales carries the DBH brand. If you have doubts about installation or want to confirm that this seal is the one for your equipment, write to us on WhatsApp with the code 8325 and the dimensions. We will reply with the technical information and the quote.