Radial shaft seal DBH 8322/85 — 19.00 x 32.00 x 7.00

DBH 8322/85 is a radial shaft seal reference, within Seals. Request a quote for 8322/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8322/85 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 19 mm shaft, 32 mm housing and 7 mm height, and design A 100, it is used in gearboxes, pumps, electric motors and power transmission equipment to prevent leaks and the ingress of dust or water. MR Accesorios Industriales carries this official brand and advises you on choosing the right seal.

This item is a seal from the DBH line, identified by the code 8322/85. Its dimensions are 19.00 mm shaft diameter, 32.00 mm housing diameter and 7.00 mm height. Design A 100 corresponds to a single-lip seal with a metal case and sealing lip, suitable for rotating shafts. The code and these dimensions are the data you need to cross-check before ordering, because any variation in the housing or shaft prevents correct installation.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, compressors, transmission shafts and process equipment. In all cases it performs the same function: retaining the lubricant inside the assembly and blocking the entry of external contaminants. It is a wear part, so it should be inspected when oil leaks, bearing noise or dirt accumulation around the shaft appear.

For installation, check that the shaft has no burrs or marks and that the surface where the lip seats is clean and lubricated. The seal is inserted perpendicular to the shaft, with a tube or press bearing on the outer edge, never on the lip. If the housing has a chamfer, respect its angle to avoid damaging the seal. Selection depends on shaft speed, operating temperature and the type of lubricant; with that data you can confirm whether design A 100 is suitable.

If you need a nearby size or an equivalent, send us the code 8322/85 along with the shaft, housing and height dimensions, and the type of equipment where it is installed. A photo of the old seal or the housing drawing also works. With that information we look for alternatives within the same category or from other brands we carry, always respecting the dimensions and sealing design your application requires.

To request a quote for the DBH 8322/85 seal or ask about a similar size, write to us on WhatsApp at MR Accesorios Industriales with the code and dimensions. We will reply with replacement options. More than 80 years supporting Argentine industry with bearings, power transmission, seals and mounting tools.