Radial shaft seal DBH 8316 — 98.50 x 144.45 x 19.00

DBH 8316 is a radial shaft seal reference, within Seals. Request a quote for 8316 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8316 radial shaft seal is a lip seal for rotating shafts that prevents oil or grease leaks and blocks dust and water from entering the bearing area. Due to its dimensions of 98.50 mm shaft, 144.45 mm housing and 19.00 mm height, it is used in gearboxes, pumps and medium-sized power transmission equipment. MR Accesorios Industriales supplies this official brand and advises you on choosing the correct seal for your application.

This item is a DBH 8316 radial shaft seal, identified by its designation 8316. Its dimensions are 98.50 mm shaft diameter, 144.45 mm housing diameter and 19.00 mm height. The Kz design corresponds to a single lip configuration with spring, designed to retain lubricant in one direction and exclude contaminants from the opposite side. It is a compact-section seal that is press-fitted into the housing and rests its lip on the rotating shaft.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, drive shafts and continuous process equipment. In all cases it fulfills the function of confining the lubricant inside the assembly and preventing dust, wash water or metal particles from entering the bearing. It is also found in old or imported machines where the exact size is not standard and the seal must be replaced without modifying the housing.

To correctly select this seal, verify that the shaft diameter, housing diameter and height match the values on the product page. Check the condition of the shaft wear track: if it has a groove, the new lip may not seal. During assembly, lubricate the lip with the same grease or oil used in the equipment, insert it perpendicular to the shaft and avoid striking it. If the equipment operates with high vibration or temperature, ask about material and design variants.

If you need a seal equivalent to the 8316 or a nearby size, the most practical approach is to send us the complete code, the shaft, housing and height dimensions, and a photo of the old seal. With that data we can look for alternatives in the same brand or in other lines we supply, respecting the mounting dimensions. We can also advise you on the lip type and material according to the fluid and operating speed.

To request a quote for the DBH 8316 seal or ask for an equivalent, send the code and dimensions via WhatsApp to MR Accesorios Industriales. We will reply with the available options and the technical data you need to confirm that the seal is the correct one for your equipment.