Radial shaft seal DBH 8298 — 15.00 x 32.00 x 7.00

DBH 8298 is a radial shaft seal reference, within Seals. Request a quote for 8298 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8298 radial shaft seal is a lip seal mounted in the housing of a rotating component to retain lubricant and block the entry of dust, water or particles. Its Lx design and dimensions of 15 mm shaft, 32 mm housing and 7 mm height make it suitable for small-diameter shafts in equipment where axial space is limited. It is used in pumps, electric motors, gear reducers and light transmissions.

This item is a DBH 8298 radial shaft seal, identified by its designation 8298. Its dimensions are 15.00 mm shaft diameter, 32.00 mm housing bore diameter and 7.00 mm height, with an Lx design. The Lx design corresponds to a single-lip seal with a metal case and sealing lip, intended for rotating shafts with lubrication. The 7 mm height defines the width of the cavity where it is housed. The lip runs on the shaft and the case fits into the housing.

Typical applications for a seal of this size include small centrifugal pumps, low-power electric motors, compact gear reducer boxes, machine tool spindles and belt or chain transmissions. It is also found in washing equipment, agitators and mixers where there is contact with water or dust. In all cases, the seal protects the bearings and the lubricant from the external environment, and helps maintain the internal pressure of the assembly.

To install a radial shaft seal, verify that the shaft is clean, free of burrs and marks, and that the sealing surface has the appropriate hardness and roughness. Lubricate the lip before inserting it and use an installation tube that presses on the case, never on the lip. Selection depends on peripheral speed, working temperature and the fluid to be retained. If the shaft shows wear, consider a neighboring size or a seal with an auxiliary lip.

If you need an equivalent or a size close to the DBH 8298, send us the part number, the shaft, housing and height dimensions, and a photo of the old seal. With that data we look for alternatives in other brands or in our in-house manufacturing line. We can also offer you the same type of seal in different material qualities depending on the fluid and temperature. The idea is that you don't end up with equipment stopped because of a seal.

To request a quote for the DBH 8298 oil seal or any of its equivalents, write to us on WhatsApp at MR Accesorios Industriales with the part number and the quantity you need. We will reply with the available options and the technical data so you can confirm the application. With more than 80 years in the field, at MR Accesorios Industriales we know the seals and oil seals used in Argentine industry.