Radial shaft seal DBH 8214Sil — 48.00 x 70.00 x 12.00

DBH 8214Sil is a radial shaft seal reference, within Seals. Request a quote for 8214Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8214Sil radial shaft seal is a lip seal that prevents oil or grease leaks and blocks the entry of dust and water in equipment with a rotating shaft. It is press-fitted into the housing and runs on the shaft with a flexible lip. Due to its dimensions of 48 mm shaft, 70 mm housing and 12 mm height, it is a common replacement part in gearboxes, pumps and electric motors. MR Accesorios Industriales sells it as an official brand.

This item is a radial shaft seal from the DBH line, identified as 8214Sil. Its nominal dimensions are 48.00 mm shaft diameter, 70.00 mm housing diameter and 12.00 mm height. The Lx-R H design corresponds to a seal with a sealing lip and a reinforced body, designed to contain lubricant and exclude contaminants under continuous rotation conditions. The 8214Sil designation makes it quick to locate in the catalogue and compare with other alternatives in the same category.

Typical applications for an oil seal of these dimensions include gearboxes, centrifugal pumps, electric motors, transmission shafts and process equipment. In all cases it fulfills the function of retaining the oil or grease inside the assembly and preventing the entry of particles, water or dust that accelerate wear on bearings and gears. It is a preventive maintenance part that should be replaced when leaks or abnormal noises are detected.

To install it correctly, verify that the shaft and housing are clean, free of burrs and marks. Lubricate the lip with the same grease or oil used in the equipment before inserting it and place the oil seal perpendicular to the shaft, using a tube or shim that presses on the outer diameter, never on the lip. If the housing shows wear, consider a nearby size or a seal with a sleeve. The selection depends on the speed, temperature and type of lubricant of the equipment.

If you need an equivalent or a different size, send us the part number 8214Sil, the shaft, housing and height measurements, and a photo of the original oil seal. With that data we can look for an alternative within the same series or from another brand we carry. We can also guide you if the space allows a slightly different height or diameter, always confirming against the manufacturer's product page before quoting.

To move forward with the quote, send the part number 8214Sil by WhatsApp to MR Accesorios Industriales. We will reply shortly with the purchasing options. If you have questions about installation or want to compare with another oil seal, write to us and we will advise you.