Radial shaft seal DBH 8211Vit — 100.00 x 120.00 x 15.00

DBH 8211Vit is a radial shaft seal reference, within Seals. Request a quote for 8211Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8211Vit radial shaft seal is a lip seal that mounts in a component housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its Lx design combines a sealing lip with a metal body that press-fits into the cavity. It is used in gearboxes, pumps, electric motors and power transmission equipment where bearings and gears must be protected. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 8211Vit radial shaft seal with the following dimensions: shaft diameter 100 mm, housing diameter 120 mm and height 15.00 mm. The Lx design corresponds to a seal with a sealing lip and press-fit body, designed to be press-fitted into the housing with the lip resting on the shaft. The 8211Vit designation identifies the size and construction type within the DBH line. Before mounting, verify that the shaft and housing match these dimensions.

Typical applications for a seal of this size include gearboxes, speed reducers, centrifugal pumps, medium-sized electric motors and belt or chain drive equipment. In all cases it serves to retain oil or grease inside the assembly and prevent contaminants from entering from outside. It is also found in road machinery, pumping equipment and process lines where the shaft rotates continuously.

To correctly select a radial shaft seal, take into account the peripheral shaft speed, the operating temperature and the type of lubricant. The lip must rest on a ground shaft surface free of splines or burrs. When mounting, lubricate the lip with the same oil or grease used in the equipment, insert it perpendicular to the shaft and avoid striking it directly. If the housing shows wear, consider a repair or the use of a seal with a wear sleeve.

If you need a nearby size or an equivalent from another brand, send us the original part number, the shaft, housing and height dimensions, and a photo of the seal. With that data we can look for the alternative within the lines we carry. We can also advise you if the Lx design is not suitable for your application and a different type of lip or body is needed. The goal is for you to leave with the correct seal and not one that fails within hours.

To request a quote for the DBH 8211Vit seal, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part and the shaft and housing dimensions. With more than 80 years in the business, we work with official brands we carry and with in-house manufacturing of housings, chains and pulleys. Write to us and we will reply with the quote.