Radial shaft seal DBH 8208 — 45.00 x 63.00 x 7.00

DBH 8208 is a radial shaft seal reference, within Seals. Request a quote for 8208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8208 radial shaft seal is a lip seal that mounts in the housing and seals against the shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions are 45 mm shaft, 63 mm housing and 7.00 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment that run with rotating shafts. MR Accesorios Industriales carries this brand and advises you on choosing the right seal.

This item is a seal from the DBH line, identified by the code 8208. Its dimensions are 45 mm shaft diameter (d), 63 mm housing diameter (D) and 7.00 mm height (h). The Lx design corresponds to a single-lipped seal with spring, intended for rotating shafts with lubrication. The sealing lip rests on the shaft and the outer diameter fits into the housing to prevent oil or grease from escaping to the outside and contaminants from entering.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, compressors, mixers and belt or chain drive equipment. In all cases, the seal protects bearings and gears from the entry of dirt and prevents lubricant leaks. It is also used in machine tools, washing equipment and conveyor systems that require a reliable seal on the shaft.

To install a seal, check that the shaft has no burrs, wear or splines, and that the housing is clean and free of deformation. Lubricate the lip before installing and press it in with a tube or sleeve that rests on the outer diameter, never on the lip. Shaft and housing runout must be minimal so as not to shorten the life of the seal. If the shaft shows a wear groove, a neighboring size or a seal with the lip in a different position can be evaluated.

If you need a seal equivalent to the 8208 or a close size, send us the code, the shaft, housing and height dimensions, and a photo of the old seal. With that data we look for alternatives in other brands or lines that maintain operation. We can also advise you if the Lx design is not suitable for your application and a different lip type or material is better.

To request a quote for the DBH 8208 seal or ask about a similar size, write to us on WhatsApp. At MR Accesorios Industriales we reply with the technical information and send you a quote. Send the code and the dimensions of your equipment so we can advise you.