Radial shaft seal DBH 8179 — 95.00 x 130.00 x 12.00

DBH 8179 is a radial shaft seal reference, within Seals. Request a quote for 8179 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8179 radial shaft seal is a lip seal mounted in the housing and closing against the rotating shaft to retain lubricant and stop the entry of dust, water or particles. Its dimensions are 95 mm shaft diameter, 130 mm housing diameter and 12 mm height, with Mx design. It is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

This item is a radial shaft seal from the DBH line, identified with code 8179. It works on a shaft of 95 mm diameter and fits into a bore of 130 mm; its total height is 12.00 mm. The Mx design corresponds to the construction with sealing lip and metal body, designed for rotating shafts with lubrication. The lip rests on the shaft and creates the dynamic seal; the outer body remains fixed in the housing. It is a wear part: when the lip hardens, crystallizes or loses elasticity, oil loss begins to appear.

Typical applications of a seal of this size are in equipment with medium-diameter transmission shafts: gearboxes, reducers, centrifugal pumps, electric motors, rollers and mixers. It is also found in machine tools and process equipment where the lubricated side must be separated from the environment. In all these cases it performs two functions at the same time: retaining the lubricant inside the assembly and preventing contaminants from entering from outside, which extends the life of bearings and gears.

To install a seal, check the condition of the shaft surface: it must be smooth, without grooves or burrs, because any mark on the sealing track accelerates lip wear. It is advisable to lubricate the lip before inserting it and to use a tube or press that rests on the outer edge, never on the lip. The shaft, housing and height dimensions must match those of the original housing; if in doubt, compare against the manufacturer's data sheet. Also check that the housing has no play or deformation.

If code 8179 does not appear on your list or you need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With those three data points we look for the equivalent in the same brand or in another line we carry. We can also verify whether the Mx design is suitable for your application or whether another lip variant is preferable. The more complete the equipment information, the faster the response.

To request a quote for the DBH 8179 seal, write to us via WhatsApp and send us the code or the dimensions. MR Accesorios Industriales carries this brand and has more than 80 years of experience in bearings, power transmission and seals, so we can also advise you on installation or selection of a replacement. If the seal goes inside an assembly, it is advisable to check the condition of the bearings and the shaft before closing.