DBH 8087Vit radial shaft seal — 82 x 105 x 12

DBH 8087Vit is a reference of radial shaft seal, within Seals. Request a quote for 8087Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8087Vit radial shaft seal is a lip seal mounted on rotating shafts to retain lubricant and exclude contaminants. Its dimensions are 82 mm shaft diameter, 105 mm housing diameter and 12 mm height. The Lx-R design combines a sealing lip and a dust lip, which improves protection in dusty or dirty environments. It is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and advises you on choosing the right seal.

This item is a radial shaft seal from the DBH brand, identified by the code 8087Vit. Its dimensions are: shaft diameter 82 mm, housing diameter 105 mm and height 12.00 mm. The Lx-R design indicates that it has a main sealing lip and a secondary exclusion lip, intended for applications where dust, water or particles are present. The lip elastomer runs against the rotating shaft, while the outer diameter is static relative to the housing. It is a wear part that requires a shaft surface in good condition to seal correctly.

Typical applications for this seal include gearboxes, reducers, centrifugal pumps, electric motors, transmission shafts and industrial equipment in general. In all cases, its function is to prevent oil or grease leaks and to protect the internal bearings from the ingress of contaminants. Due to its dimensions, it is found in medium-sized equipment, where radial space is limited and an effective barrier is required. It is also used in agricultural and road machinery, where exposure to dust and mud is frequent.

To install this seal, verify that the shaft diameter is within the recommended tolerance and that the contact surface has no burrs or deep marks. The housing must be clean and undamaged; suitable roughness helps the outer diameter seal statically. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the seal perpendicular to the shaft, using a tube or press that bears on the outer ring. Avoid striking the lip. If the shaft shows wear, consider a repair sleeve or an alternative size.

If you need an equivalent seal, the most practical thing is to send us the code 8087Vit or the current dimensions (shaft diameter, housing and height) via WhatsApp. At MR Accesorios Industriales we can look for alternatives in other brands or configurations within the same seal category. We can also advise you if the space allows a single-lip or double-lip seal, or if it is better to switch to a design with greater protection. The more data you give us, the more accurate the proposal will be.

To request a quote for the DBH 8087Vit seal, write to us on WhatsApp and mention the code. At MR Accesorios Industriales we reply with the technical information and the alternatives. If you have doubts about installation or selection, our team can help you define the best option for your equipment.