Radial shaft seal DBH 8049 — 15.00 x 24.00 x 7.00

DBH 8049 is a radial shaft seal reference, within Seals. Request a quote for 8049 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8049 radial shaft seal is a lip seal mounted in a machine housing to retain lubricant and prevent the ingress of dust, water or particles. With a 15 mm shaft diameter, 24 mm housing diameter and 7 mm height, and an Lx design, it is a common replacement part in equipment with small-section shafts. MR Accesorios Industriales supplies this brand and helps you confirm the size before requesting a quote.

The DBH 8049 is a radial shaft seal with an Lx design. Its dimensions are 15 mm shaft diameter (d), 24 mm housing diameter (D) and 7.00 mm height (h). The sealing lip runs on the rotating shaft and the outer case seats in the housing. The Lx design defines the geometry of the lip and the metal body, which influences sealing performance and rotation resistance. It is a replacement part, not a component that fits any size: the shaft, housing and height must match the values indicated.

It is used in gearboxes, pumps, electric motors, compressors, machine tools and transmission equipment where the shaft has a 15 mm diameter. It also appears in agricultural implements, conveyors and process equipment that need to contain oil or grease and keep contamination out. In all these cases, the seal protects bearings and sliding surfaces and extends the service life of the assembly. If the seal wears out, lubricant loss and the entry of dirt accelerate the failure of nearby bearings.

To install a radial shaft seal, check that the shaft is clean, free of burrs and marks, and lubricate the lip before inserting it. The housing must be straight and undamaged; if it has scratches, the seal will not seat properly. The 7.00 mm height defines how far the seal protrudes from the housing, so do not replace it with a taller or shorter one without checking the available space. The Lx design has a lip that works in one direction; if the equipment rotates in both directions, ask whether another configuration is required. Speed and working temperature also determine the choice of lip material.

If you cannot find part number 8049 or need a nearby size, send the shaft diameter, housing diameter and height you have measured, along with a photo of the old seal and the housing. With that data we can look for an equivalent in the same brand or in another line we supply. The code engraved on the seal or the equipment part number also helps. The more accurate the information, the faster we can confirm whether a compatible alternative is available.

MR Accesorios Industriales supplies the DBH brand and has more than 80 years of experience in bearings, power transmission and seals. If this DBH 8049 seal is the one you need, write to us on WhatsApp with the part number and quantity. We will provide a quote with no obligation. We can also advise you if the seal is mounted on equipment that operates with vibration, high temperature or exposure to dust, so you can choose the right variant.