Product page
Radial shaft seal DBH 8038Pol — 42.00 x 56.00 x 7.00
- Manufacturer Part Number
- 8038Pol
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 8038Pol is a radial shaft seal reference, within Seals. Request a quote for 8038Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 8038Pol oil seal is a radial shaft seal with a 42 mm shaft diameter, 56 mm housing diameter and 7 mm height, in the Lx-R design. It is used to retain lubricant and exclude contaminants on rotating shafts inside gearboxes, motors and industrial equipment. MR Accesorios Industriales supplies this official brand and advises you so you choose the right seal for your application.
This item is a DBH 8038Pol radial shaft seal, identified by its 8038Pol designation. Its dimensions are 42.00 mm shaft diameter (d), 56.00 mm housing diameter (D) and 7.00 mm height (h). The Lx-R design indicates a configuration with a sealing lip and spring, suitable for rotating shafts. The lip elastomer and the metal body work together to keep lubricant in and contaminants out.
It is used in typical applications such as gearboxes, pumps, electric motors, drive shafts and process equipment. In these environments, the seal prevents oil or grease leaks and protects the bearings from dust, water or particles. It is a wear part that should be replaced when dripping, noise or shaft play appears.
To install it, check that the shaft and housing are clean and free of burrs. Lubricate the lip with the same oil or grease used in service before inserting it. Insert the seal perpendicularly, without striking the lip, using a suitable tube or press. If the shaft shows wear, consider an adjacent size or a seal with an auxiliary lip. The selection depends on speed, temperature and type of lubricant.
If you need an equivalent or a close size, send us the 8038Pol code or the 42x56x7 dimensions. We can also look for alternatives in other brands or configurations. With your equipment data, we guide you so the part performs its function without premature failure. Write to us on WhatsApp and we will quote you shortly.
Dimensions
- Shaft (d)
- 42mm
- Housing bore (D)
- 56mm
- Height (h)
- 7.00mm
- Design
- Lx-R
Frequently Asked Questions
- What are the dimensions of the DBH 8038Pol oil seal?
- The DBH 8038Pol oil seal has a 42.00 mm shaft diameter, 56.00 mm housing diameter and 7.00 mm height. These dimensions correspond to the 8038Pol designation and are the ones you must verify before replacing it.
- What applications is this oil seal suitable for?
- It is used on rotating shafts of gearboxes, pumps, motors and industrial equipment. Its function is to retain lubricant and exclude dust or water. It is suitable for moderate speed and temperature conditions, depending on the lubricant and the condition of the shaft.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with the 8038Pol code or the 42x56x7 dimensions. At MR Accesorios Industriales we send you the quote and, if needed, we look for an adjacent size or an equivalent oil seal for your equipment.