Radial shaft seal DBH 8016 — 32.00 x 62.00 x 3.00/7.50

DBH 8016 is a radial shaft seal reference, within Seals. Request a quote for 8016 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8016 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing, while also preventing the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and power transmission equipment where lubricant must be retained at a rotating point. MR Accesorios Industriales carries this brand and helps you confirm the exact size before requesting a quote.

This item is a radial shaft seal of design A 038 with the following dimensions: shaft diameter 32 mm, housing diameter 62 mm and height 3.00/7.50 mm. The height expressed as a range indicates a profile with an outer lip taller than the fitting body, typical of seals mounted in housings with a recess. The sealing lip runs on the shaft and the outer diameter fits by interference in the housing.

Typical applications for a seal of this size are gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and belt or chain drive equipment. It also appears in machine tools, industrial washing equipment and hydraulic systems where lubricant must be contained at the point where the shaft passes through the casing. In all these cases the seal protects the bearing and extends the life of the assembly.

To select and install a radial shaft seal, take into account the diameter and condition of the shaft surface: it must be polished, free of burrs and wear marks in the lip contact area. Also check the housing diameter and depth, and that the lip spring faces the lubricant side. During installation, lubricate the lip and use an insertion tool to avoid damaging it. If the shaft shows a groove or wear, consider a neighboring size or a design with an auxiliary lip.

If you need an equivalent, a neighboring size or the same seal in another material, send us the part number 8016 along with the shaft, housing and height dimensions. You can also send us a photo of the old seal or the housing with a caliper held against it. With that data we check the manufacturer's product page and offer the alternative that best fits your equipment.

At MR Accesorios Industriales we work with seals and oil seals for industrial equipment maintenance and repair. Write to us on WhatsApp with the part number DBH 8016 or with the dimensions of your application and we will send you a quote.