DBH 8013Pol radial shaft seal — 40 x 75 x 12

DBH 8013Pol is a reference of radial shaft seal, within Seals. Request a quote for 8013Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8013Pol radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of contaminants such as dust, water or particles. With dimensions of 40 mm shaft diameter, 75 mm housing and 12 mm height, and an A 050-R design, it is a common replacement part in industrial equipment. MR Accesorios Industriales offers this brand and advises you to choose the correct seal.

This item is a radial shaft seal from the DBH brand, identified with the code 8013Pol. Its dimensions are: shaft diameter (d) 40 mm, housing diameter (D) 75 mm and height (h) 12.00 mm. The A 050-R design corresponds to a specific construction configuration within the DBH seal line. It is a sealing component that works on a rotating shaft, with an elastomer lip that makes contact and a metal case that is press-fitted into the housing.

Typical applications for a seal of these dimensions include gearboxes, pumps, electric motors, rollers and power transmission equipment. In general, it is found in assemblies where a shaft rotates inside a fixed housing and oil or grease must be contained, while at the same time protecting bearings and gears from the environment. It is a wear part that should be replaced when lubricant loss appears or when the lip shows stiffness, cuts or irregular wear.

To install a radial shaft seal, verify that the shaft has no burrs or deep marks in the contact area, and that the housing is clean and free of deformation. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, using a suitable tool that presses on the case, never on the lip. Seal selection must consider the actual shaft and housing dimensions, the type of lubricant, the operating temperature and the peripheral speed. If you have doubts, consult us and we will help you validate the choice.

If you need a seal equivalent to the 8013Pol, the most practical thing is to send us the code, a photo of the part and the dimensions measured with a caliper. The assembly drawing or the code of the equipment where it is mounted also works. With that data we can look for alternatives within the same brand or other lines we offer, always respecting the dimensions and the sealing design. We do not improvise dimensions: we confirm against the manufacturer's data sheet before quoting.

At MR Accesorios Industriales we work with seals and oil seals, and we know the most common applications in the industry. If this DBH 8013Pol oil seal is the one you are looking for, send us the code via WhatsApp and we will send you the quote. If you are not sure about the size, write to us anyway: we will help you identify the correct replacement.