DBH 6907 radial shaft seal — 17 x 24 x 4

DBH 6907 is a reference of radial shaft seal, within Seals. Request a quote for 6907 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6907 oil seal is a radial shaft seal with a 17 mm shaft diameter, 24 mm housing diameter and 4 mm height, with an A 051 design. It is used to retain lubricant and exclude contaminants on rotating shafts, within assemblies where axial space is limited. Its elastomer lip runs on the shaft and its metal case is press-fitted into the housing. It is a wear part that should be replaced when oil leakage or dirt ingress appears.

This DBH 6907 oil seal has a shaft diameter of 17 mm, a housing diameter of 24 mm and a height of 4.00 mm. The A 051 design corresponds to the construction geometry of the lip and the case. It is a single-lip radial shaft seal, intended for rotating shafts with lubrication. The 6907 nomenclature identifies the metric size: 17 mm shaft by 24 mm housing by 4 mm width. Always verify these three dimensions before ordering a replacement.

It is used in pumps, electric motors, gear reducers, gearboxes and power transmission equipment. It also appears in machine tools, agitators and process equipment where oil or grease must be contained and dust or water kept out. It is common in applications with moderate speeds and temperatures within the usual range of elastomers. If the equipment runs with a lot of vibration or misalignment, it is advisable to check the condition of the shaft and the housing before installing the new oil seal.

To select an oil seal correctly, you must check the shaft diameter, the housing diameter and the available height. The shaft must be smooth, without splines or burrs in the sealing area, with suitable hardness and roughness. The housing must be clean and free of deformation. During installation, lubricate the lip with the same oil or grease used in the equipment and use a tool that presses on the outer edge, never on the lip. If the shaft shows wear, consider an oil seal with the lip in a different position.

If you need an equivalent, send us the 6907 code along with the shaft, housing and height dimensions. A photo of the old oil seal and of the area where it is installed is also helpful. With that data we can look for an alternative within the DBH line or from other brands we carry. If space allows, an oil seal with a different height or with a lip design that better suits the type of contaminant can be considered.

MR Accesorios Industriales carries the DBH brand as a brand. If you want to request a quote for the DBH 6907 oil seal, write to us on WhatsApp with the code and the dimensions. We will reply with the alternative that best fits your equipment.