DBH 6762Pol radial shaft seal — 60.23 x 85.73 x 22.86

DBH 6762Pol is a reference of radial shaft seal, within Seals. Request a quote for 6762Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6762Pol radial shaft seal is a lip seal that retains lubricant and blocks the entry of dust, water, or particles in equipment with a rotating shaft. It is press-fitted into the housing and works on the shaft with a flexible lip that maintains sealing during rotation. It is a wear part: when oil leakage or dirt ingress appears, it is replaced. MR Accesorios Industriales sells this brand and helps you identify the correct size.

This item is a DBH radial shaft seal identified as 6762Pol, with the following dimensions: shaft diameter 60.23 mm, housing diameter 85.73 mm, and height 22.86 mm. The indicated design is A 238. These dimensions define the seat in the housing and the fit on the shaft, so it is advisable to verify them with a caliper before ordering the replacement. The code 6762Pol is the reference you will use to request a quote.

It is used in gearboxes, pumps, electric motors, rollers, and transmission equipment where a shaft rotates inside a housing and oil or grease needs to be retained. It also appears in applications with exposure to dust or water, where the sealing lip prevents the contaminant from reaching the bearing. It is commonly found in maintenance of industrial plants, process lines, and agricultural machinery.

To install it, clean the housing and shaft, check that there are no burrs or marks that could damage the lip, and lubricate the sealing edge before inserting it. The seal must enter perpendicular, without blows that deform the case. If the shaft shows wear in the contact area, consider a design with an auxiliary lip. Selection depends on speed, temperature, and the fluid to be retained.

If you need an equivalent, send the code 6762Pol along with the shaft, housing, and height dimensions. With that data, an alternative can be found in the same brand or another line, always confirming the design and lip material. You can also send a photo of the old part or the housing to avoid identification errors.

MR Accesorios Industriales sells the DBH brand. To request a quote for this seal, write via WhatsApp and provide the code 6762Pol or the dimensions you need. We will respond with the available option and alternatives that fit your equipment.