Radial shaft seal DBH 6736 — 17.00 x 28.00 x 7.00/10.00

DBH 6736 is a radial shaft seal reference, within Seals. Request a quote for 6736 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6736 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the ingress of dust, water or contaminating particles. With dimensions of 17 mm shaft, 28 mm housing and a height of 7.00/10.00 mm, it fits spaces where the cavity has a stepped depth. It is a wear part that should be replaced when there are signs of leakage or hardening of the elastomer.

This item is a radial shaft seal from the DBH brand, identified by the code 6736. Its dimensions are: shaft diameter 17 mm, housing diameter 28 mm and height 7.00/10.00 mm. The Mz-R design corresponds to a seal with a sealing lip and a specific construction configuration that combines a metal body with elastomer. The double height (7 and 10 mm) suggests that the cavity can accommodate the seal in two positions or that the profile has a step. To confirm the exact geometry, it is always advisable to check against the manufacturer's data sheet.

Radial shaft seals such as the DBH 6736 are used in gearboxes, pumps, electric motors, transmission shafts and process equipment. Their mission is twofold: to retain the oil or grease of the bearing and to exclude external contaminants. In environments with dust, wash water or chips, the sealing lip works under demanding conditions, so the selection of the elastomer material and the type of internal spring are key. This model, due to its compact dimensions, is common in low and medium power equipment.

To install a seal, verify that the shaft has no burrs or excessive wear in the contact area. The surface must be polished and lubricated before inserting the seal. The housing must be clean and free of deformation. When tapping, use a support tube that rests on the outer ring, never on the lip. If the shaft has a deep groove, consider a wear sleeve or a seal with an auxiliary lip. The 7.00/10.00 mm height allows some mounting flexibility, but respect the position indicated by the equipment manufacturer.

If you need a seal equivalent to the DBH 6736, or a nearby size because the shaft or housing has a different dimension, send us the complete code or the exact dimensions (shaft diameter, housing diameter and height). With that data we can look for alternatives in other brands or series we carry. We can also advise you on the type of elastomer (nitrile, viton, polyurethane) according to the temperature and the working fluid. At MR Accesorios Industriales we have more than 80 years of experience in seals and oil seals.

To request a quote for the DBH 6736 seal or to inquire about a similar size, send the code via WhatsApp to MR Accesorios Industriales. We will reply with the quote and replacement options. If you have doubts about installation or selection, our technical team can help you choose the right seal for your application. Remember that correct installation and the right lubricant extend the service life of the seal and protect the bearings.