Radial shaft seal DBH 6714Pol — 140.00 x 165.00 x 15.00

DBH 6714Pol is a radial shaft seal reference, within Seals. Request a quote for 6714Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6714Pol radial shaft seal is a lip seal that closes the passage of oil or grease between a rotating shaft and its housing. With 140 mm shaft diameter, 165 mm housing and 15 mm height, and Mx-R design, it is used in gearboxes, pumps and power transmission equipment where lubricant must be retained and the entry of dust or water stopped. MR Accesorios Industriales sells this brand and quotes it via WhatsApp.

This item is a DBH 6714Pol radial shaft seal, with the dimensions shown in its designation: 140.00 mm shaft diameter (d), 165.00 mm housing diameter (D) and 15.00 mm height (h). The Mx-R design corresponds to the construction variant of the lip and the metal body, intended for press fitting into a cylindrical housing. It is a single lip seal, with the elastomer vulcanized onto the outer ring, which works rubbing against the shaft and contains the lubricant inside the assembly.

Typical applications for an oil seal of these dimensions appear in gearboxes, reducers, centrifugal pumps, rollers and power transmission equipment. It is also found on industrial fan shafts and in machines where a lubricated environment must be separated from another with dust or moisture. In all cases, the seal protects the nearby bearing or bushing and prevents oil losses that dirty the work area.

To select it properly, verify that the shaft diameter and the housing diameter match the values on the product page and that the mounting height fits the cavity. Check the condition of the track: a shaft with scratches or oval wear means the lip will not seal even if the size is correct. During installation, lubricate the lip with the same grease or oil used in the equipment, insert it perpendicular and strike on the outer ring, never on the elastomer. If the equipment works with a lot of vibration, consider a housing or a bearing with adequate clearance.

If you need a nearby size or an equivalent from another brand, send us the code 6714Pol together with the shaft, housing and height dimensions, and the type of lubricant used in the equipment. With that data we look for the available alternative in the DBH line or in the other brands we sell. We can also advise you if the seal is mounted on a worn shaft and a repair sleeve should be considered.

To request a quote for the DBH 6714Pol oil seal or ask about a similar size, write to us on WhatsApp at MR Accesorios Industriales with the code and dimensions. We will reply with the alternative that best fits your equipment.