Radial shaft seal DBH 6710 — 25.00 x 35.00 x 7.00

DBH 6710 is a radial shaft seal reference, within Seals. Request a quote for 6710 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6710 radial shaft seal is a lip seal that is mounted in the housing of a fixed component and seals against a rotating shaft. Its function is to retain lubricant inside the assembly and stop the entry of dust, water or particles. With a 25 mm shaft, 35 mm housing and 7 mm height, it is a compact size frequently used in transmission equipment and industrial machinery.

The DBH 6710 has a shaft diameter of 25 mm, a housing diameter of 35 mm and a height of 7.00 mm. Its design is Lx, a single-lip configuration with a metal body that is press-fitted into the cavity. The sealing lip works on the shaft with slight interference to maintain contact, while the outer body ensures retention in the housing. It is a small-section seal, designed for spaces where there is no room for taller seals.

It is used in gearboxes, pumps, electric motors, fan shafts and transmission equipment in general. It also appears in agricultural machinery, conveyors and industrial tools where bearings or bushings must be protected from the entry of contaminants. Being a 25 x 35 x 7 mm size, it is common on small-diameter shafts that rotate at moderate speeds and need a reliable seal without adding much weight or volume to the assembly.

To install it, make sure the shaft has no burrs or deep marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip before inserting it and fit the seal perpendicular to the shaft, using a tube or spacer that presses on the outer edge, never on the lip. If the shaft shows wear, consider a nearby size or a seal with an offset lip. Selection depends on the speed, temperature and type of lubricant in the equipment.

If you need an equivalent to the 6710 or a nearby size, send us the code and the shaft, housing and height dimensions. It also helps if you tell us the brand and model of the equipment where it is mounted. At MR Accesorios Industriales we work with seals from different lines and can guide you toward the option that best suits your application. DBH is an official brand that MR carries, so ask us about alternatives.

To request a quote for the DBH 6710 seal, write to us on WhatsApp and send us the code 6710 along with the quantity you need. If you have doubts about the size, send us a photo of the old seal or the dimensions measured with a caliper. That way we can confirm whether it is the same item or whether it is better to look for a variant. We are here to advise you on the selection and replacement of seals for your equipment.