Radial shaft seal DBH 6654 — 25.00 x 40.00 x 7.00

DBH 6654 is a radial shaft seal reference, within Seals. Request a quote for 6654 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6654 radial shaft seal is a lip seal mounted on the shaft and inside the housing to retain lubricant and block the entry of dust, water or particles. Its dimensions are 25.00 mm shaft, 40.00 mm housing and 7.00 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment that rotate at moderate speed and need a reliable barrier between the inside and the outside.

This item is a seal from the DBH line, identified with part number 6654. Its nominal dimensions are 25.00 mm shaft diameter, 40.00 mm housing diameter and 7.00 mm height. The Lx design corresponds to a single-lip radial shaft seal with spring, intended for rotating shafts with permanent lubrication. The elastomeric lip bears on the shaft and the metal case fits into the housing to maintain sealing during rotation.

Typical applications for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, conveyor rollers and belt or chain drive equipment. In all cases it fulfills the function of retaining the oil or grease inside the assembly and preventing contaminants from entering from the outside. It is a wear part that should be checked when lubricant leaks or abnormal noises appear in the seal area.

To install it, verify that the shaft is clean, free of burrs or deep marks, and that the housing has the correct diameter and depth. Lubricate the lip before inserting it and seat the seal with a tube or press that bears on the case, never on the lip. If the shaft shows wear, consider a neighboring size or a seal with the lip in a different position. Selection depends on the speed, temperature and type of lubricant of the equipment.

If you need an equivalent or a different size, send us part number 6654 together with the shaft, housing and height dimensions. You can also send a photo of the old seal or the assembly drawing. With that data we check neighboring sizes or a compatible replacement within the same DBH line. If the record is not enough, we confirm tolerances and material against the manufacturer's data sheet.

MR Accesorios Industriales carries the DBH brand as part of its line of seals and oil seals. If this seal is for equipment in operation, send part number 6654 by WhatsApp and we will send you a quote with the alternatives we have. We can also advise you on installation or on selecting an equivalent seal for your application.