DBH 6626 radial shaft seal — 170 x 200 x 15

DBH 6626 is a reference of radial shaft seal, within Seals. Request a quote for 6626 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6626 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 170 mm shaft diameter, 200 mm housing diameter and 15 mm height, and Lz design, it is fitted in gearboxes, pumps and medium-to-large transmission equipment. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

This item is a radial shaft seal from the DBH line, identified by the code 6626. Its dimensions are 170 mm shaft diameter (d), 200 mm housing diameter (D) and 15.00 mm height (h). The Lz design corresponds to a single sealing lip with spring, designed to retain lubricant and exclude dust under normal working conditions. It is a standard replacement part, not a special development: it is replaced by size, not by application.

It is used in equipment where a shaft rotates inside a housing containing lubricant: gearboxes, centrifugal pumps, mixers, chain conveyors and rollers of older machines or heavy maintenance. It also appears in large electric motors and presses. In all those cases it performs the same function: preventing oil leaks to the outside and preventing dust or water from entering the bearing or bushing.

To select it, check that the shaft has no burrs or wear in the contact area: a new seal on a scratched shaft will leak again. Measure the shaft diameter and the housing diameter with a caliper, and compare with the 170 mm and 200 mm in this product page. The 15.00 mm height must match the width of the housing. If the shaft is worn, consider a repair sleeve before fitting.

If you need an equivalent or a different size, send us the code 6626, the equipment brand and the measurements you took. With that we search the DBH line or another brand with similar performance. The seal does not have to be the same brand as the original: what matters is that shaft diameter, housing diameter, height and lip type match.

MR Accesorios Industriales carries the DBH brand. To request a quote for this seal, write to us on WhatsApp with the code 6626 and the shaft and housing measurements. We will reply with the available option.