Radial shaft seal DBH 6496 — 66.68 x 115.88 x 21.50

DBH 6496 is a radial shaft seal reference, within Seals. Request a quote for 6496 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6496 radial shaft seal is a single-lip radial seal placed between a rotating shaft and its housing to retain lubricant and block the entry of dust, water or particles. Due to its dimensions of 66.68 mm shaft, 115.88 mm housing and 21.50 mm height, and its A 024-R design, it is used in gearboxes, pumps, electric motors and power transmission equipment operating with oil or grease. MR Accesorios Industriales carries it as an official brand.

This item is a DBH 6496 radial shaft seal, identified by the 6496 designation and the A 024-R design. Its dimensions are 66.68 mm shaft diameter (d), 115.88 mm housing diameter (D) and 21.50 mm height (h). The sealing lip runs on the shaft and the outer case fits into the housing; this combination keeps lubricant in and contaminants out. It is a direct replacement part for equipment that already has that size defined.

Typical applications for a seal of this size appear in gearboxes, centrifugal pumps, electric motors, rollers and transmission shafts. In these machines, the seal protects the bearings and the lubricant from the entry of dust or water, and prevents leaks that dirty the surroundings. It is also used in process, conveying and agricultural or road machinery where there are rotating shafts with a standard housing.

To install it, verify that the shaft has no burrs or wear on the sealing surface and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the seal perpendicular to the shaft, without striking it directly on the lip. If the shaft has a deep groove, consider a wear sleeve or a seal size with the lip in a different position. Selection depends on speed, temperature and the fluid to be retained.

If you need an equivalent or a nearby size, send us the 6496 code or the current shaft, housing and height dimensions. The code engraved on the old seal or a photo of the part also works. With that data we search for alternatives within the DBH line or from other brands we carry, respecting the A 024-R design and the housing tolerances. You do not need to have the data sheet on hand: we confirm it with the manufacturer.

To request a quote for the DBH 6496 radial shaft seal, write to us on WhatsApp with the code and the quantity you need. MR Accesorios Industriales carries this brand as part of its line of seals and radial shaft seals, along with bearings, housings and power transmission. If the seal is mounted on critical equipment, ask us about the installation and the service conditions so that the choice is the right one.