Radial shaft seal DBH 6482 — 63.50 x 88.90 x 19.05

DBH 6482 is a radial shaft seal reference, within Seals. Request a quote for 6482 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6482 oil seal is a single-lip radial seal placed between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Because of its dimensions —63.50 mm shaft, 88.90 mm housing and 19.05 mm height— it is used in gearboxes, pumps and power transmission equipment where bearings and gears must be protected. MR Accesorios Industriales carries this brand and quotes it on WhatsApp with the exact part number.

The DBH 6482 is a radial shaft seal with an Mr design, intended for 63.5 mm diameter shafts, 88.9 mm housings and a 19.05 mm height. The flexible lip runs on the shaft and seals against the lubricant, while the outer body fits into the housing. It is a common replacement part in equipment where the shaft rotates and oil or grease leaks and the entry of contaminants must be prevented. It is selected by those three dimensions and by the type of service: continuous rotation, low pressure or exposure to dust.

Typical applications for this oil seal include gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission equipment. In all these cases it performs the same function: keep the lubricant inside the assembly and protect the bearings or bushings from the entry of dirt. It is also used in agricultural machinery, conveyors and industrial equipment where the shaft has rotating motion and the environment is not clean. If the equipment operates with a lot of vibration or temperature, it is worth checking the condition of the shaft before mounting.

To install a radial shaft seal, the shaft must be clean, free of burrs and deep marks, and the housing free of deformation. It is recommended to lubricate the lip before inserting it, seat it well perpendicular and use a tube or press that pushes on the outer edge, never on the lip. Selection depends on the shaft diameter, the housing and the available height; also on the type of lubricant and the rotation speed. If the shaft is worn, a nearby size or a seal with an auxiliary lip is sometimes preferable.

If you need an equivalent or a size close to the 6482, send us the shaft, housing and height dimensions, plus a photo of the old seal or the part number on the part. With that data we look for alternatives within the same radial seal category. We can also check whether there is a standard size that replaces the original without modifying the housing. The more complete the information, the faster we give you a useful answer.

To request a quote for the DBH 6482 oil seal or ask about another size, write to us on WhatsApp at MR Accesorios Industriales with the part number 6482 and the dimensions. We'll quote that reference or a compatible alternative. We work with industrial brands and in-house manufacturing, and we support the technical selection when needed. With the part number and dimensions on hand, the inquiry is resolved in a few steps.